<P>hello,</P>
<P> I have built up 802.1x by linux client xsupplicant & hostap & freeradius ,then i replace the xsupplicant with winXP client , it all work fine !</P>
<P>but,now i followed the <A href="http://support.microsoft.com/default.aspx?scid=kb;en-us;313664">http://support.microsoft.com/default.aspx?scid=kb;en-us;313664</A> to replace winXP with Win2k . ( have used win2000 SP3 and have install the win2000 client downloading from MS's web site and start up the wareless server ... ) It seems there is something wrong when win2k transmit eap frames with hostap !</P>
<P> why? i have forgoten doing something important ?</P>
<P>./hostap -x -d -o 127.0.0.1 -a 127.0.0.1 -s whatever wlan0</P>
<P>i got:</P>
<P>Opening raw packet socket for ifindex 5<BR>Using interface wlan0ap with hwaddr 00:40:05:af:05:14 and ssid 'test'<BR>Flushing old station entries<BR>Received 30 bytes management frame<BR>MGMT<BR>mgmt::auth<BR>authentication: STA=00:40:05:af:05:2e auth_alg=0 auth_transaction=1 status_code=0<BR> New STA<BR>Station 00:40:05:af:05:2e authenticated (open system)<BR>Received 40 bytes management frame<BR>MGMT<BR>mgmt::assoc_req<BR>association request: STA=00:40:05:af:05:2e capab_info=0x01 listen_interval=1<BR> new AID 1<BR>Station 00:40:05:af:05:2e associated (aid 1)<BR>IEEE 802.1X: Start authentication for new station 00:40:05:af:05:2e<BR>IEEE 802.1X: 00:40:05:af:05:2e AUTH_PAE entering state INITIALIZE<BR>IEEE 802.1X: 00:40:05:af:05:2e BE_AUTH entering state INITIALIZE<BR>IEEE 802.1X: 00:40:05:af:05:2e REAUTH_TIMER entering state INITIALIZE<BR>IEEE 802.1X: 00:40:05:af:05:2e AUTH_KEY_TX entering state NO_KEY_TRANSMIT<BR>IEEE 802.1X: 00:40:05:af:05:2e AUTH_PAE enterin!
g state DISCONNECTED<BR>IEEE 802.1X: Unauthorizing station 00:40:05:af:05:2e<BR>IEEE 802.1X: Sending canned EAP packet FAILURE to 00:40:05:af:05:2e (identifier 0)<BR>IEEE 802.1X: 00:40:05:af:05:2e BE_AUTH entering state IDLE<BR>IEEE 802.1X: 00:40:05:af:05:2e REAUTH_TIMER entering state INITIALIZE<BR>IEEE 802.1X: 00:40:05:af:05:2e AUTH_PAE entering state CONNECTING<BR>IEEE 802.1X: Sending EAP Request-Identity to 00:40:05:af:05:2e (identifier 1)<BR>IEEE 802.1X: 00:40:05:af:05:2e REAUTH_TIMER entering state INITIALIZE<BR>IEEE 802.1X: 00:40:05:af:05:2e REAUTH_TIMER entering state INITIALIZE<BR>IEEE 802.1X: 00:40:05:af:05:2e REAUTH_TIMER entering state INITIALIZE<BR>IEEE 802.1X: 00:40:05:af:05:2e AUTH_PAE entering state CONNECTING<BR>IEEE 802.1X: Sending EAP Request-Identity to 00:40:05:af:05:2e (identifier 1)<BR>IEEE 802.1X: 00:40:05:af:05:2e REAUTH_TIMER entering state INITIALIZE<BR>IEEE 802.1X: 00:40:05:af:05:2e REAUTH_TIMER entering state INITIALIZE<BR>IEEE 802.1X: 00:40:05:!
af:05:2e REAUTH_TIMER entering state INITIALIZE<BR>IEEE 802.1X: 00:40:
05:af:05:2e REAUTH_TIMER entering state INITIALIZE<BR>Signal 2 received - terminating<BR>Flushing old station entries<BR>Deauthenticate all stations</P>
<P>============================</P>
<P>run the freeradius ,i got : it seem he have not got some frames from hostap!</P>
<P>... ......... </P>
<P>.........<BR> radutmp: callerid = yes<BR>Module: Instantiated radutmp (radutmp) <BR> main: smux_password = ""<BR> main: snmp_write_access = no<BR>SMUX connect try 1<BR>Can't connect to SNMP agent with SMUX: Connection refused<BR>Listening on IP address *, ports 1812/udp and 1813/udp, with proxy on 1814/udp.<BR>Ready to process requests.</P>
<P>=================</P>
<P>by the way , i am using d-link dwl 520 adaptor .</P>
<P> thanks!!</P><p><br><hr size=1><b>Do You Yahoo!?</b><br>
<a href="http://rd.yahoo.com/mail_cn/tag/?http://cn.messenger.yahoo.com//chat/index.html
">"雅虎通网络KTV, 随时随地免费卡拉OK~~"</a>