<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1126" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>SuSE 8.0 (fresh) Hostap 10/03.... The
driver will compile (make pccard) and install (make install_pccard)
fine...</FONT></DIV>
<DIV><FONT face=Arial size=2>after installing the driver you can 'modprobe
hostap_cs' and it will load the driver fine. <U>But it wont create
wlan0</U>, the interface. if i reboot at this point, the
machine finds the pcmcia adapter (pci to pcmcia adapter) and tries to initialize
the prism2_cs driver (per dmesg), this doesnt work (you get the low
freq beep), but it doesnt even TRY to load the hostap_cs driver... what am i
doing wrong? I did the same thing with a plx adapter (same
os/hostap) in a diff mobo and even though i had to modprobe to get it to load,
at least it creates wlan0, and i can use it... </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Where am i going wrong and what info is needed to
help troubleshoot this...?</FONT></DIV></BODY></HTML>