<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii">
<META NAME="Generator" CONTENT="MS Exchange Server version 5.5.2653.12">
<TITLE>Monitor mode and FCS</TITLE>
</HEAD>
<BODY>

<P><FONT SIZE=2>Hi all,</FONT>
</P>

<P><FONT SIZE=2>We are working in monitor mode with Hostap-2002-10-12 and a linksys WPC11 pccard v3. We tried the set-up the card in order to receive the frame with a wrong FCS (prism2_param wlan0 monitor_allow_fcserr 1).</FONT></P>

<P><FONT SIZE=2>We then use wlansniff. The packets belong to a downlink multicast RTP stream forwarded by an access point (PC + hostap). We added in sniff the display of the RTP sequence number.Being closed to the AP, all received frames are good (status : 0000) and the RTP sequence number is sequential.</FONT></P>

<P><FONT SIZE=2>In order to create some wrong frames, we move away from the access point. What we observed is that wlansniff display only good (status : 0000) frames although our RTP sequence number was not anymore continuous.</FONT></P>

<P><FONT SIZE=2>We got the same result with different prism2x cards.</FONT>
</P>

<P><FONT SIZE=2>QUESTION : Does prism2_param wlan0 monitor_allow_fcserr works with any card ? Did we missed something in our configuration ?</FONT></P>

<P><FONT SIZE=2>Thanks</FONT>
</P>

<P><FONT SIZE=2>Guillaume Bichot</FONT>
<BR><FONT SIZE=2>THOMSON </FONT>
</P>

</BODY>
</HTML>