[PATCH 3/3] wpa_cli: Add missing parameters for "set" command completion routine

Mikael Kanstrup mikael.kanstrup at gmail.com
Sat Mar 14 19:37:08 EDT 2015


From: Mikael Kanstrup <mikael.kanstrup at sonymobile.com>

Some config parameters were missing in the "set" command completion
routine. Add missing parameters and while at it put the parameters
under compiler switches so only valid ones are shown.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup at sonymobile.com>
---
 wpa_supplicant/wpa_cli.c | 72 +++++++++++++++++++++++++++++++-----------------
 1 file changed, 47 insertions(+), 25 deletions(-)

diff --git a/wpa_supplicant/wpa_cli.c b/wpa_supplicant/wpa_cli.c
index 32fe7c2..de0cfe8 100644
--- a/wpa_supplicant/wpa_cli.c
+++ b/wpa_supplicant/wpa_cli.c
@@ -608,35 +608,57 @@ static char ** wpa_cli_complete_set(const char *str, int pos)
 		"uapsd", "ps", "wifi_display", "bssid_filter", "disallow_aps",
 		"no_keep_alive",
 		/* global configuration parameters */
-		"eapol_version", "ap_scan", "disable_scan_offload",
-		"fast_reauth", "opensc_engine_path", "pkcs11_engine_path",
-		"pkcs11_module_path", "openssl_ciphers",
-		"pcsc_reader", "pcsc_pin",
-		"driver_param", "dot11RSNAConfigPMKLifetime",
+#ifdef CONFIG_CTRL_IFACE
+		"ctrl_interface", "no_ctrl_interface", "ctrl_interface_group",
+#endif /* CONFIG_CTRL_IFACE */
+		"eapol_version", "ap_scan", "bgscan",
+#ifdef CONFIG_MESH
+		"user_mpm", "max_peer_links", "mesh_max_inactivity",
+#endif /* CONFIG_MESH */
+		"disable_scan_offload", "fast_reauth", "opensc_engine_path",
+		"pkcs11_engine_path", "pkcs11_module_path", "openssl_ciphers",
+		"pcsc_reader", "pcsc_pin", "external_sim", "driver_param",
+		"dot11RSNAConfigPMKLifetime",
 		"dot11RSNAConfigPMKReauthThreshold",
 		"dot11RSNAConfigSATimeout",
-		"update_config", "load_dynamic_eap", "uuid", "device_name",
-		"manufacturer", "model_name", "model_number", "serial_number",
-		"device_type", "os_version", "config_methods",
-		"wps_cred_processing", "wps_vendor_ext_m1", "sec_device_type",
+#ifndef CONFIG_NO_CONFIG_WRITE
+		"update_config",
+#endif /* CONFIG_NO_CONFIG_WRITE */
+		"load_dynamic_eap",
+#ifdef CONFIG_WPS
+		"uuid", "device_name", "manufacturer", "model_name",
+		"model_number", "serial_number", "device_type", "os_version",
+		"config_methods", "wps_cred_processing", "wps_vendor_ext_m1",
+#endif /* CONFIG_WPS */
+#ifdef CONFIG_P2P
+		"sec_device_type",
 		"p2p_listen_reg_class", "p2p_listen_channel",
-		"p2p_oper_reg_class", "p2p_oper_channel",
-		"p2p_go_intent", "p2p_ssid_postfix", "persistent_reconnect",
-		"p2p_intra_bss", "p2p_group_idle", "p2p_pref_chan",
-		"p2p_no_go_freq",
-		"p2p_go_ht40", "p2p_disabled", "p2p_no_group_iface",
-		"p2p_go_vht",
-		"p2p_ignore_shared_freq", "country", "bss_max_count",
-		"bss_expiration_age", "bss_expiration_scan_count",
-		"filter_ssids", "filter_rssi", "max_num_sta",
-		"disassoc_low_ack", "hs20", "interworking", "hessid",
-		"access_network_type", "pbc_in_m1", "autoscan",
-		"wps_nfc_dev_pw_id", "wps_nfc_dh_pubkey", "wps_nfc_dh_privkey",
-		"wps_nfc_dev_pw", "ext_password_backend",
+		"p2p_oper_reg_class", "p2p_oper_channel", "p2p_go_intent",
+		"p2p_ssid_postfix", "persistent_reconnect", "p2p_intra_bss",
+		"p2p_group_idle", "p2p_passphrase_len", "p2p_pref_chan",
+		"p2p_no_go_freq", "p2p_add_cli_chan",
+		"p2p_optimize_listen_chan", "p2p_go_ht40", "p2p_go_vht",
+		"p2p_disabled", "p2p_go_ctwindow", "p2p_no_group_iface",
+		"p2p_ignore_shared_freq", "ip_addr_go", "ip_addr_mask",
+		"ip_addr_start", "ip_addr_end",
+#endif /* CONFIG_P2P */
+		"country", "bss_max_count", "bss_expiration_age",
+		"bss_expiration_scan_count", "filter_ssids", "filter_rssi",
+		"max_num_sta", "disassoc_low_ack",
+#ifdef CONFIG_HS20
+		"hs20",
+#endif /* CONFIG_HS20 */
+		"interworking", "hessid", "access_network_type", "pbc_in_m1",
+		"autoscan", "wps_nfc_dev_pw_id", "wps_nfc_dh_pubkey",
+		"wps_nfc_dh_privkey", "wps_nfc_dev_pw", "ext_password_backend",
 		"p2p_go_max_inactivity", "auto_interworking", "okc", "pmf",
-		"sae_groups", "dtim_period", "beacon_int", "ap_vendor_elements",
-		"ignore_old_scan_res", "freq_list", "external_sim",
-		"tdls_external_control", "p2p_search_delay"
+		"sae_groups", "dtim_period", "beacon_int",
+		"ap_vendor_elements", "ignore_old_scan_res", "freq_list",
+		"scan_cur_freq", "sched_scan_interval",
+		"tdls_external_control", "osu_dir", "wowlan_triggers",
+		"p2p_search_delay", "mac_addr", "rand_addr_lifetime",
+		"preassoc_mac_addr", "key_mgmt_offload", "passive_scan",
+		"reassoc_same_bss_optim"
 	};
 	int i, num_fields = ARRAY_SIZE(fields);
 
-- 
1.8.2.2



More information about the HostAP mailing list