issue when running AP and client on router simultaneously

Sourav sourav.chakraborty at netcommwireless.com
Thu Jan 29 00:29:23 EST 2015


On 29/01/15 16:27, Ben Greear wrote:
> This probably a driver issue..what NIC/driver are you using?
rt2x00 open source drivers with Ralink RT3072 chipset
>
> Ben
>
>
> On 01/28/2015 08:49 PM, Sourav wrote:
>> Hi,
>> We are running AP(via hostapd) and client(via wpa_supplicant),simultaneously, on our routers. However if the AP to which our router is connected, is switched off......no STAs can connect to our router(though hostapd is running).
>> When the client connection to the remote AP is restored, can STAs connect to our router......have you guys observed this issue? If so how to get over it.....
>>
>> Also please let me know, how to detect if client connection is lost from wpa_supplicant.
>>


-- 
Warm Regards,
Sourav


______________________________________________________________________
This communication contains information which may be confidential or privileged. The information is intended solely for the use of the individual or entity named above.  If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.  If you have received this communication in error, please notify me by telephone immediately.
______________________________________________________________________


More information about the HostAP mailing list