[PATCH 4/5] nl80211: pass TDLS channel-switch start/stop params to kernel

Ilan Peer ilan.peer at intel.com
Sun Dec 28 22:35:20 EST 2014


From: Arik Nemtsov <arik at wizery.com>

The kernel-driver/FW are responsible for performing periodic switches
to the target channel with the given peer. Propagate all TDLS ch-switching
related information to kernel.

Signed-off-by: Arik Nemtsov <arikx.nemtsov at intel.com>
---
 src/drivers/driver_nl80211.c | 70 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 69 insertions(+), 1 deletion(-)

diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index cff7b0d..70b9074 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -3363,7 +3363,7 @@ fail:
 
 
 static int nl80211_put_freq_params(struct nl_msg *msg,
-				   struct hostapd_freq_params *freq)
+				   const struct hostapd_freq_params *freq)
 {
 	if (nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, freq->freq))
 		return -ENOBUFS;
@@ -6958,6 +6958,72 @@ static int nl80211_tdls_oper(void *priv, enum tdls_oper oper, const u8 *peer)
 	return send_and_recv_msgs(drv, msg, NULL, NULL);
 }
 
+
+static int
+nl80211_tdls_enable_channel_switch(void *priv, const u8 *addr, u8 oper_class,
+				   const struct hostapd_freq_params *params)
+{
+	struct i802_bss *bss = priv;
+	struct wpa_driver_nl80211_data *drv = bss->drv;
+	struct nl_msg *msg;
+	int ret;
+
+	if (!(drv->capa.flags & WPA_DRIVER_FLAGS_TDLS_SUPPORT) ||
+	    !(drv->capa.flags & WPA_DRIVER_FLAGS_TDLS_CHANNEL_SWITCH))
+		return -EOPNOTSUPP;
+
+	msg = nlmsg_alloc();
+	if (!msg)
+		return -ENOMEM;
+
+	nl80211_cmd(drv, msg, 0, NL80211_CMD_TDLS_CHANNEL_SWITCH);
+	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, drv->ifindex);
+	NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, addr);
+	NLA_PUT_U8(msg, NL80211_ATTR_OPER_CLASS, oper_class);
+	ret = nl80211_put_freq_params(msg, params);
+	if (ret)
+		goto error;
+
+	return send_and_recv_msgs(drv, msg, NULL, NULL);
+
+nla_put_failure:
+	ret = -ENOBUFS;
+error:
+	nlmsg_free(msg);
+	wpa_printf(MSG_DEBUG, "nl80211: Could not build TDLS chan switch");
+	return ret;
+}
+
+
+static int
+nl80211_tdls_disable_channel_switch(void *priv, const u8 *addr)
+{
+	struct i802_bss *bss = priv;
+	struct wpa_driver_nl80211_data *drv = bss->drv;
+	struct nl_msg *msg;
+	int ret;
+
+	if (!(drv->capa.flags & WPA_DRIVER_FLAGS_TDLS_SUPPORT) ||
+	    !(drv->capa.flags & WPA_DRIVER_FLAGS_TDLS_CHANNEL_SWITCH))
+		return -EOPNOTSUPP;
+
+	msg = nlmsg_alloc();
+	if (!msg)
+		return -ENOMEM;
+
+	nl80211_cmd(drv, msg, 0, NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH);
+	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, drv->ifindex);
+	NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, addr);
+
+	return send_and_recv_msgs(drv, msg, NULL, NULL);
+
+nla_put_failure:
+	ret = -ENOBUFS;
+	nlmsg_free(msg);
+	wpa_printf(MSG_DEBUG,
+		   "nl80211: Could not build TDLS cancel chan switch");
+	return ret;
+}
 #endif /* CONFIG TDLS */
 
 
@@ -8245,6 +8311,8 @@ const struct wpa_driver_ops wpa_driver_nl80211_ops = {
 #ifdef CONFIG_TDLS
 	.send_tdls_mgmt = nl80211_send_tdls_mgmt,
 	.tdls_oper = nl80211_tdls_oper,
+	.tdls_enable_channel_switch = nl80211_tdls_enable_channel_switch,
+	.tdls_disable_channel_switch = nl80211_tdls_disable_channel_switch,
 #endif /* CONFIG_TDLS */
 	.update_ft_ies = wpa_driver_nl80211_update_ft_ies,
 	.get_mac_addr = wpa_driver_nl80211_get_macaddr,
-- 
1.8.3.2



More information about the HostAP mailing list