[PATCH] dbus: add SignalPoll() method to report current signal properties
Dan Williams
dcbw at redhat.com
Mon Aug 18 16:00:36 EDT 2014
Analagous to the control interface's SIGNAL_POLL request.
Signed-hostap: Dan Williams <dcbw at redhat.com>
---
Example:
$ sudo dbus-send --system --print-reply --dest=fi.w1.wpa_supplicant1 /fi/w1/wpa_supplicant1/Interfaces/1 fi.w1.wpa_supplicant1.Interface.SignalPoll
method return sender=:1.268 -> dest=:1.273 reply_serial=2
variant array [
dict entry(
string "rssi"
variant int32 -47
)
dict entry(
string "linkspeed"
variant int32 54
)
dict entry(
string "noise"
variant int32 9999
)
dict entry(
string "frequency"
variant uint32 2462
)
dict entry(
string "width"
variant string "20 MHz (no HT)"
)
dict entry(
string "avg-rssi"
variant int32 -42
)
]
wpa_supplicant/ctrl_iface.c | 24 +---------
wpa_supplicant/dbus/dbus_new.c | 7 +++
wpa_supplicant/dbus/dbus_new_handlers.c | 81 +++++++++++++++++++++++++++++++++
wpa_supplicant/dbus/dbus_new_handlers.h | 3 ++
wpa_supplicant/wpas_glue.c | 21 +++++++++
wpa_supplicant/wpas_glue.h | 3 ++
6 files changed, 116 insertions(+), 23 deletions(-)
diff --git a/wpa_supplicant/ctrl_iface.c b/wpa_supplicant/ctrl_iface.c
index 9970597..fe31805 100644
--- a/wpa_supplicant/ctrl_iface.c
+++ b/wpa_supplicant/ctrl_iface.c
@@ -37,14 +37,15 @@
#include "scan.h"
#include "ctrl_iface.h"
#include "interworking.h"
#include "blacklist.h"
#include "autoscan.h"
#include "wnm_sta.h"
#include "offchannel.h"
+#include "wpas_glue.h"
static int wpa_supplicant_global_iface_list(struct wpa_global *global,
char *buf, int len);
static int wpa_supplicant_global_iface_interfaces(struct wpa_global *global,
char *buf, int len);
static int * freq_range_to_channel_list(struct wpa_supplicant *wpa_s,
char *val);
@@ -5448,37 +5449,14 @@ static int wpas_ctrl_iface_wnm_bss_query(struct wpa_supplicant *wpa_s, char *cmd
query_reason);
return wnm_send_bss_transition_mgmt_query(wpa_s, query_reason);
}
#endif /* CONFIG_WNM */
-
-/* Get string representation of channel width */
-static const char * channel_width_name(enum chan_width width)
-{
- switch (width) {
- case CHAN_WIDTH_20_NOHT:
- return "20 MHz (no HT)";
- case CHAN_WIDTH_20:
- return "20 MHz";
- case CHAN_WIDTH_40:
- return "40 MHz";
- case CHAN_WIDTH_80:
- return "80 MHz";
- case CHAN_WIDTH_80P80:
- return "80+80 MHz";
- case CHAN_WIDTH_160:
- return "160 MHz";
- default:
- return "unknown";
- }
-}
-
-
static int wpa_supplicant_signal_poll(struct wpa_supplicant *wpa_s, char *buf,
size_t buflen)
{
struct wpa_signal_info si;
int ret;
char *pos, *end;
diff --git a/wpa_supplicant/dbus/dbus_new.c b/wpa_supplicant/dbus/dbus_new.c
index aab2225..7cee614 100644
--- a/wpa_supplicant/dbus/dbus_new.c
+++ b/wpa_supplicant/dbus/dbus_new.c
@@ -2433,14 +2433,21 @@ static const struct wpa_dbus_method_desc wpas_dbus_interface_methods[] = {
{ "Scan", WPAS_DBUS_NEW_IFACE_INTERFACE,
(WPADBusMethodHandler) &wpas_dbus_handler_scan,
{
{ "args", "a{sv}", ARG_IN },
END_ARGS
}
},
+ { "SignalPoll", WPAS_DBUS_NEW_IFACE_INTERFACE,
+ (WPADBusMethodHandler) &wpas_dbus_handler_signal_poll,
+ {
+ { "args", "a{sv}", ARG_OUT },
+ END_ARGS
+ }
+ },
{ "Disconnect", WPAS_DBUS_NEW_IFACE_INTERFACE,
(WPADBusMethodHandler) &wpas_dbus_handler_disconnect,
{
END_ARGS
}
},
{ "AddNetwork", WPAS_DBUS_NEW_IFACE_INTERFACE,
diff --git a/wpa_supplicant/dbus/dbus_new_handlers.c b/wpa_supplicant/dbus/dbus_new_handlers.c
index bd38d65..a9c65cc 100644
--- a/wpa_supplicant/dbus/dbus_new_handlers.c
+++ b/wpa_supplicant/dbus/dbus_new_handlers.c
@@ -23,14 +23,15 @@
#include "../scan.h"
#include "../autoscan.h"
#include "dbus_new_helpers.h"
#include "dbus_new.h"
#include "dbus_new_handlers.h"
#include "dbus_dict_helpers.h"
#include "dbus_common_i.h"
+#include "../wpas_glue.h"
static const char *debug_strings[] = {
"excessive", "msgdump", "debug", "info", "warning", "error", NULL
};
/**
@@ -1386,14 +1387,94 @@ out:
for (i = 0; i < WPAS_MAX_SCAN_SSIDS; i++)
os_free((u8 *) params.ssids[i].ssid);
os_free((u8 *) params.extra_ies);
os_free(params.freqs);
return reply;
}
+/**
+ * wpas_dbus_handler_signal_poll - Request immediate signal properties
+ * @message: Pointer to incoming dbus message
+ * @wpa_s: wpa_supplicant structure for a network interface
+ * Returns: NULL indicating success or DBus error message on failure
+ *
+ * Handler function for "SignalPoll" method call of a network device. Requests
+ * that wpa_supplicant read signal properties like RSSI, noise, and link
+ * speed and return them.
+ */
+DBusMessage * wpas_dbus_handler_signal_poll(DBusMessage *message,
+ struct wpa_supplicant *wpa_s)
+{
+ struct wpa_signal_info si;
+ DBusMessage *reply = NULL;
+ DBusMessageIter iter, iter_dict, variant_iter;
+ int ret;
+
+ ret = wpa_drv_signal_poll(wpa_s, &si);
+ if (ret) {
+ return dbus_message_new_error(message, DBUS_ERROR_FAILED,
+ "Failed to read signal");
+ }
+
+ reply = dbus_message_new_method_return(message);
+ if (reply == NULL)
+ goto nomem;
+
+ dbus_message_iter_init_append(reply, &iter);
+
+ if (!dbus_message_iter_open_container(&iter, DBUS_TYPE_VARIANT,
+ "a{sv}", &variant_iter))
+ goto nomem;
+ if (!wpa_dbus_dict_open_write(&variant_iter, &iter_dict))
+ goto nomem;
+
+ if (!wpa_dbus_dict_append_int32(&iter_dict, "rssi", si.current_signal))
+ goto nomem;
+ if (!wpa_dbus_dict_append_int32(&iter_dict, "linkspeed",
+ si.current_txrate / 1000))
+ goto nomem;
+ if (!wpa_dbus_dict_append_int32(&iter_dict, "noise", si.current_noise))
+ goto nomem;
+ if (!wpa_dbus_dict_append_uint32(&iter_dict, "frequency", si.frequency))
+ goto nomem;
+
+ if (si.chanwidth != CHAN_WIDTH_UNKNOWN) {
+ if (!wpa_dbus_dict_append_string(&iter_dict, "width",
+ channel_width_name(si.chanwidth)))
+ goto nomem;
+ }
+
+ if (si.center_frq1 > 0 && si.center_frq2 > 0) {
+ if (!wpa_dbus_dict_append_int32(&iter_dict, "center-frq1",
+ si.center_frq1))
+ goto nomem;
+ if (!wpa_dbus_dict_append_int32(&iter_dict, "center-frq2",
+ si.center_frq2))
+ goto nomem;
+ }
+
+ if (si.avg_signal) {
+ if (!wpa_dbus_dict_append_int32(&iter_dict, "avg-rssi",
+ si.avg_signal))
+ goto nomem;
+ }
+
+ if (!wpa_dbus_dict_close_write(&variant_iter, &iter_dict))
+ goto nomem;
+ if (!dbus_message_iter_close_container(&iter, &variant_iter))
+ goto nomem;
+
+ return reply;
+
+nomem:
+ if (reply)
+ dbus_message_unref(reply);
+ reply = dbus_message_new_error(message, DBUS_ERROR_NO_MEMORY, NULL);
+ return reply;
+}
/*
* wpas_dbus_handler_disconnect - Terminate the current connection
* @message: Pointer to incoming dbus message
* @wpa_s: wpa_supplicant structure for a network interface
* Returns: NotConnected DBus error message if already not connected
* or NULL otherwise.
diff --git a/wpa_supplicant/dbus/dbus_new_handlers.h b/wpa_supplicant/dbus/dbus_new_handlers.h
index 461970d..f00eb88 100644
--- a/wpa_supplicant/dbus/dbus_new_handlers.h
+++ b/wpa_supplicant/dbus/dbus_new_handlers.h
@@ -83,14 +83,17 @@ dbus_bool_t wpas_dbus_getter_eap_methods(DBusMessageIter *iter,
dbus_bool_t wpas_dbus_getter_global_capabilities(DBusMessageIter *iter,
DBusError *error,
void *user_data);
DBusMessage * wpas_dbus_handler_scan(DBusMessage *message,
struct wpa_supplicant *wpa_s);
+DBusMessage * wpas_dbus_handler_signal_poll(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
DBusMessage * wpas_dbus_handler_disconnect(DBusMessage *message,
struct wpa_supplicant *wpa_s);
dbus_bool_t set_network_properties(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid,
DBusMessageIter *iter,
DBusError *error);
diff --git a/wpa_supplicant/wpas_glue.c b/wpa_supplicant/wpas_glue.c
index 350b122..b77e5d3 100644
--- a/wpa_supplicant/wpas_glue.c
+++ b/wpa_supplicant/wpas_glue.c
@@ -966,7 +966,28 @@ void wpa_supplicant_rsn_supp_set_config(struct wpa_supplicant *wpa_s,
wpabuf_free(p2p);
}
}
#endif /* CONFIG_P2P */
}
wpa_sm_set_config(wpa_s->wpa, ssid ? &conf : NULL);
}
+
+/* Get string representation of channel width */
+const char * channel_width_name(enum chan_width width)
+{
+ switch (width) {
+ case CHAN_WIDTH_20_NOHT:
+ return "20 MHz (no HT)";
+ case CHAN_WIDTH_20:
+ return "20 MHz";
+ case CHAN_WIDTH_40:
+ return "40 MHz";
+ case CHAN_WIDTH_80:
+ return "80 MHz";
+ case CHAN_WIDTH_80P80:
+ return "80+80 MHz";
+ case CHAN_WIDTH_160:
+ return "160 MHz";
+ default:
+ return "unknown";
+ }
+}
diff --git a/wpa_supplicant/wpas_glue.h b/wpa_supplicant/wpas_glue.h
index 9808c22..8dd99ff 100644
--- a/wpa_supplicant/wpas_glue.h
+++ b/wpa_supplicant/wpas_glue.h
@@ -6,20 +6,23 @@
* See README for more details.
*/
#ifndef WPAS_GLUE_H
#define WPAS_GLUE_H
enum wpa_ctrl_req_type;
+enum chan_width;
int wpa_supplicant_init_eapol(struct wpa_supplicant *wpa_s);
int wpa_supplicant_init_wpa(struct wpa_supplicant *wpa_s);
void wpa_supplicant_rsn_supp_set_config(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid);
const char * wpa_supplicant_ctrl_req_to_string(enum wpa_ctrl_req_type field,
const char *default_txt,
const char **txt);
enum wpa_ctrl_req_type wpa_supplicant_ctrl_req_from_string(const char *field);
+const char * channel_width_name(enum chan_width width);
+
#endif /* WPAS_GLUE_H */
--
1.9.3
More information about the HostAP
mailing list