[RFC 3/3] wpa_supplicant: Report 40MHz Intolerance to associated AP.

Rajkumar Manoharan rmanohar at qca.qualcomm.com
Sun Jul 17 02:06:07 EDT 2011


This patch adds support for 40MHz intolerance handling in STA
mode. STA should report of any 40MHz intolerance in case if it
finds a non-HT AP or a HT AP which prohibits 40MHz transmission
(i.e 40MHz intolerant bit is set in HT capabilities IE).

STA shall report this condition using 20/40 BSS coexistence
action frame.

Signed-off-by: Rajkumar Manoharan <rmanohar at qca.qualcomm.com>
---
 wpa_supplicant/events.c         |    2 +
 wpa_supplicant/sme.c            |   43 ++++++++++++++++++++++++++++++++
 wpa_supplicant/sme.h            |    6 ++++
 wpa_supplicant/wpa_supplicant.c |   51 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 102 insertions(+), 0 deletions(-)

diff --git a/wpa_supplicant/events.c b/wpa_supplicant/events.c
index b398792..663ec81 100644
--- a/wpa_supplicant/events.c
+++ b/wpa_supplicant/events.c
@@ -951,6 +951,8 @@ static int _wpa_supplicant_event_scan_results(struct wpa_supplicant *wpa_s,
 		return 0;
 	}
 
+	wpa_supplicant_proc_40mhz_intolerant(wpa_s);
+
 	if (bgscan_notify_scan(wpa_s, scan_res) == 1) {
 		wpa_scan_results_free(scan_res);
 		return 0;
diff --git a/wpa_supplicant/sme.c b/wpa_supplicant/sme.c
index 325ffc5..9e050ed 100644
--- a/wpa_supplicant/sme.c
+++ b/wpa_supplicant/sme.c
@@ -590,7 +590,50 @@ void sme_deinit(struct wpa_supplicant *wpa_s)
 	eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
 }
 
+void sme_send_2040_bss_coex(struct wpa_supplicant *wpa_s,
+			    u8 *chan_list, u8 n_channels)
+{
+	struct ieee80211_2040_bss_coex_ie *bc_ie;
+	struct ieee80211_2040_intol_chan_report *ic_report;
+	struct wpabuf *buf;
+	u8 *pos;
+
+	wpa_printf(MSG_DEBUG, "MLME: Send 20/40 BSS Coexistence");
+
+	buf = wpabuf_alloc(2 + /* action.category + action_code */
+			   sizeof(struct ieee80211_2040_bss_coex_ie) +
+			   sizeof(struct ieee80211_2040_intol_chan_report) +
+			   n_channels);
+	if (buf == NULL)
+		return;
+
+	pos = wpabuf_put(buf, 2);
+	pos[0] = WLAN_ACTION_PUBLIC;
+	pos[1] = WLAN_PA_20_40_BSS_COEX;
 
+	bc_ie = wpabuf_put(buf, sizeof(*bc_ie));
+	bc_ie->element_id = WLAN_EID_20_40_BSS_COEXISTENCE;
+	bc_ie->length = 1;
+	bc_ie->coex_param = WLAN_20_40_BSS_COEX_20MHZ_WIDTH_REQ;
+
+	ic_report = wpabuf_put(buf, sizeof(*ic_report));
+	ic_report->element_id = WLAN_EID_20_40_BSS_INTOLERANT;
+	ic_report->length = n_channels + 1;
+	freq_to_channel(wpa_s->current_bss->freq, &ic_report->reg_class, 0);
+
+	if (n_channels) {
+		pos = wpabuf_put(buf, n_channels);
+		os_memcpy(pos, chan_list, n_channels);
+	}
+
+	if (wpa_drv_send_action(wpa_s, wpa_s->assoc_freq, 0, wpa_s->bssid,
+				wpa_s->own_addr, wpa_s->bssid,
+				wpabuf_head(buf), wpabuf_len(buf)) < 0)
+		wpa_msg(wpa_s, MSG_INFO, "SME: Failed to send 20/40 BSS "
+				"Coexistence frame");
+
+	wpabuf_free(buf);
+}
 #ifdef CONFIG_IEEE80211W
 
 static const unsigned int sa_query_max_timeout = 1000;
diff --git a/wpa_supplicant/sme.h b/wpa_supplicant/sme.h
index a59b38d..60ccf56 100644
--- a/wpa_supplicant/sme.h
+++ b/wpa_supplicant/sme.h
@@ -41,6 +41,8 @@ void sme_disassoc_while_authenticating(struct wpa_supplicant *wpa_s,
 				       const u8 *prev_pending_bssid);
 void sme_deinit(struct wpa_supplicant *wpa_s);
 
+void sme_send_2040_bss_coex(struct wpa_supplicant *wpa_s,
+			    u8 *chan_list, u8 n_channels);
 #else /* CONFIG_SME */
 
 static inline void sme_authenticate(struct wpa_supplicant *wpa_s,
@@ -101,6 +103,10 @@ static inline void sme_deinit(struct wpa_supplicant *wpa_s)
 {
 }
 
+static inline void sme_send_2040_bss_coex(struct wpa_supplicant *wpa_s,
+					  u8 *chan_list, u8 n_channels)
+{
+}
 #endif /* CONFIG_SME */
 
 #endif /* SME_H */
diff --git a/wpa_supplicant/wpa_supplicant.c b/wpa_supplicant/wpa_supplicant.c
index f303b40..25c7c44 100644
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
@@ -2824,3 +2824,54 @@ void wpas_connection_failed(struct wpa_supplicant *wpa_s, const u8 *bssid)
 	wpa_supplicant_req_scan(wpa_s, timeout / 1000,
 				1000 * (timeout % 1000));
 }
+
+void wpa_supplicant_proc_40mhz_intolerant(struct wpa_supplicant *wpa_s)
+{
+	struct wpa_bss *bss, *n;
+	struct ieee80211_ht_capabilities *cap;
+	enum nl80211_band assoc_band;
+	Boolean found_intolerant = FALSE;
+	const u8 *ie;
+	u8 intol_channels[28], tmp_channel;
+	u8 n_channels = 0;
+
+	if (wpa_s->wpa_state != WPA_COMPLETED)
+		return;
+
+	/* Check for not-ht association */
+	ie = wpa_bss_get_ie(wpa_s->current_bss, WLAN_EID_HT_CAP);
+	if (!ie)
+		return;
+
+	os_memset(intol_channels, 0, 28);
+
+	assoc_band = freq_to_channel(wpa_s->current_bss->freq, 0, 0);
+	dl_list_for_each_safe(bss, n, &wpa_s->bss, struct wpa_bss, list) {
+		/* Skip other band bss */
+		if (freq_to_channel(bss->freq, 0, &tmp_channel) != assoc_band)
+			continue;
+		ie = wpa_bss_get_ie(bss, WLAN_EID_HT_CAP);
+		if (!ie) {
+			/* To avoid channel duplication */
+			if (!n_channels ||
+			    intol_channels[n_channels - 1] != tmp_channel)
+				intol_channels[n_channels++] = tmp_channel;
+			found_intolerant = TRUE;
+		} else {
+			cap = (struct ieee80211_ht_capabilities *) ie + 2;
+			if (le_to_host16(cap->ht_capabilities_info) &
+				HT_CAP_INFO_40MHZ_INTOLERANT) {
+				/* To avoid channel duplication */
+				if (!n_channels ||
+				    intol_channels[n_channels - 1]
+					!= tmp_channel)
+					intol_channels[n_channels++] =
+						tmp_channel;
+				found_intolerant = TRUE;
+			}
+		}
+	}
+
+	if (found_intolerant)
+		sme_send_2040_bss_coex(wpa_s, intol_channels, n_channels);
+}
-- 
1.7.6



More information about the HostAP mailing list