Number of workstation
chunkeey at googlemail.com
Wed Jul 6 09:51:39 EDT 2011
On Wednesday, July 06, 2011 08:38:50 AM Mike Baroukh wrote:
> I'm a new hostap user so sorry if this is a dumb question.
> I made an access point that works nice but seems to have a limit on
> number of workstations that can connect to it.
> When too much users are connected, the next who will try will trigger in
> syslog :
> If another workstation disconnect, this one will then success.
> My hope is to handle about 50 workstations but I actually, the max I can
> handle is 7 simultaneous users (saw using kill -USR1 <pid>) .
> My question is : could this be a built in limit of the usb dongle I use?
> Parameter max_num_sta is set to 500 so the limit is not on hostapd.
> In fact, i'm not really sure to understand the limit between what
> hostapd does, the wifi driver does and the wifi card does ...
> Infos on my config :
> My box is built on a small pc so I had to use a usb wifi dongle :
> TP-LINK TL-WN721N
> (lsusb : Bus 001 Device 002: ID 0cf3:9271 Atheros Communications, Inc.
> AR9271 802.11n)
> I used linux-wireless to build the ath9k_htc driver.
> The OS is a debian squeeze 32 bits.
a quote from "ath9k_htc: Allow upto two simultaneous interfaces":
The maximum number of stations that can be handled in
the firmware is 8, manage the station slots accordingly.
I guess one slot is reserved for a different use [probably for
the AP interface itself...]
More information about the HostAP