p2p test Error: "CTRL-EVENT-EAP-FAILURE"

Jouni Malinen j at w1.fi
Sun Aug 7 03:28:52 EDT 2011


On Sun, Aug 07, 2011 at 10:46:23AM +0800, 12 wrote:
> Hello,I have a wireless card which chipest is AR9271. Today I test the p2p usage with latest compat-wireless release,using the latest hostap from  git://w1.fi/srv/git/hostap.git . But I failed connect two P2P devices with"p2p_find/p2p_connect" commands. It just look like there is some error in the EAP  method choosing phase .The two devices reports the fllowing message.

> <3>CTRL-EVENT-EAP-PROPOSED-METHOD vendor=14122 method=254
> <3>CTRL-EVENT-EAP-FAILURE b0:48:7a:06:bc:c9
> <3>P2P-GROUP-FORMATION-FAILURE

> <3>CTRL-EVENT-EAP-PROPOSED-METHOD vendor=14122 method=1
> <3>CTRL-EVENT-EAP-METHOD EAP vendor 14122 method 1 (WSC) selected
> <3>CTRL-EVENT-EAP-FAILURE EAP authentication failed
> <3>WPS-FAIL
> <3>CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00 reason=2
> <3>P2P-GROUP-FORMATION-FAILURE

That does not look like EAP method selection issue, but something going
wrong during WPS. Please collect more debug information from both
devices by adding -ddt to the wpa_supplicant command line and looking at
the debug log rather than the limited messages showing up in wpa_cli.

-- 
Jouni Malinen                                            PGP id EFC895FA


More information about the HostAP mailing list