wpa_supplicant problem in architecture arm

Nguyen Manh Toan diego10bk at gmail.com
Tue Aug 10 11:58:21 EDT 2010


Hello,
I have card wifi Broadcom *BCM4329* in my ebook.
And here is the logs I have after the command: *dmesg*

[14393.070000] ***********Chip Information**********
[14393.070000] Create  dhd_dpc_thread...
[14393.075000] dhdsdio_probe: Register interrupt callback fun dhdsdio_isr(),
but mask it (not operational yet)
[14393.075000] dhd_bus_start: fw_path= nvram_path=
[14393.075000] dhd_bus_download_firmware: fw_path= nvram_path=
[14393.095000] dhd_dpc_thread is created
[14393.100000] fw_path=NULL or fw_path[0] = 0
[14393.110000] [14092.833775] eth0: Broadcom Dongle Host Driver
[14393.110000] [14092.833775]
[14393.110000] Dongle Host Driver, version 4.218.116.16
[14393.110000] Compiled in
/temp/Broadcom/GSPI-Coffee-intr/src/dhd/linux/../.. on Aug  6 2010 at
20:07:54
[14395.625000] dhd_bus_start: fw_path= nvram_path=
[14395.625000] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[14395.625000] Set SDIO_CORE...
[14395.630000] dhd_bus_init: enable SDIO device interrupts
[14395.630000] dhd_bus_init: dhdp->busstate = DHD_BUS_DATA
[14395.630000] dhd_prot_init()++
[14395.650000] dhd_prot_init()--
[14395.650000] multicast MAC=01: 00: 5E: 00: 00: 01
[14472.995000] multicast MAC=01: 00: 5E: 00: 00: 01
[14473.015000] dhd_stop()++
[14473.015000] dhd_stop()--
[14560.950000] dhd_bus_start: fw_path= nvram_path=
[14560.955000] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[14560.955000] Set SDIO_CORE...
[14560.960000] dhd_bus_init: enable SDIO device interrupts
[14560.960000] dhd_bus_init: dhdp->busstate = DHD_BUS_DATA
[14560.960000] dhd_prot_init()++
[14560.970000] dhd_prot_init()--
[14560.970000] multicast MAC=01: 00: 5E: 00: 00: 01
[14560.975000] multicast MAC=01: 00: 5E: 00: 00: 01
[14639.170000] multicast MAC=01: 00: 5E: 00: 00: 01
[14639.190000] dhd_stop()++
[14639.190000] dhd_stop()--

Thank for your helps

On Tue, Aug 10, 2010 at 5:50 PM, Jouni Malinen <j at w1.fi> wrote:

> On Tue, Aug 10, 2010 at 10:37:14AM +0200, Nguyen Manh Toan wrote:
>
> > I want to use wpa_supplicant to connect to internet in a e-book who has a
> > operation system Linux 2.6.21 and ARM architecture.
>
> Which WLAN hardware and driver are you using?
>
> --
> Jouni Malinen                                            PGP id EFC895FA
> _______________________________________________
> HostAP mailing list
> HostAP at lists.shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
>



-- 
Nguyen Manh Toan - ISI 2 ENSIMAG
129F residence OUEST
PFIEV k 50
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20100810/6cd04dcf/attachment-0001.htm 


More information about the HostAP mailing list