BUG? I can reproduce "Association request to the driver failed" at will

Johannes Berg johannes at sipsolutions.net
Sat Oct 10 14:39:58 EDT 2009


Sorry to warm this up ...

> 1253527140.795498: State: COMPLETED -> AUTHENTICATING
> 1253527140.795515: EAPOL: External notification - EAP success=0
> 1253527140.795530: EAPOL: External notification - EAP fail=0
> 1253527140.795542: EAPOL: External notification - portControl=Auto
> 1253527140.795559: nl80211: Authenticate (ifindex=34)
> 1253527140.795572:   * bssid=00:13:19:80:da:30
> 1253527140.795587:   * freq=2412
> 1253527140.795598:   * SSID - hexdump_ascii(len=5):
>      4d 4e 57 50 41                                    MNWPA
> 1253527140.795630:   * IEs - hexdump(len=0): [NULL]
> 1253527140.795643:   * Auth Type 0
> 1253527140.795683: nl80211: Authentication request send successfully
> 1253527140.795707: RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
> 1253527140.795725: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
> 1253527140.953161: nl80211: Event message available
> 1253527140.953200: nl80211: MLME event 37
> 1253527140.953216: SME: Authentication response: peer=00:13:19:80:da:30 auth_type=0 status_code=0
> 1253527140.953243: Trying to associate with 00:13:19:80:da:30 (SSID='MNWPA' freq=2412 MHz)
> 1253527140.953257: State: AUTHENTICATING -> ASSOCIATING
> 1253527140.953270: wpa_driver_nl80211_set_operstate: operstate 1->0 (DORMANT)
> 1253527140.953284: nl80211: Operstate: linkmode=-1, operstate=5
> 1253527140.953901: nl80211: Associate (ifindex=34)
> 1253527140.953919:   * bssid=00:13:19:80:da:30
> 1253527140.953934:   * freq=2412
> 1253527140.953945:   * SSID - hexdump_ascii(len=5):
>      4d 4e 57 50 41                                    MNWPA
> 1253527140.953977:   * IEs - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> 1253527140.954064: nl80211: MLME command failed: ret=-114 (Operation already in progress)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> 1253527140.954086: Association request to the driver failed
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> 1253527140.954113: RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
> 1253527140.954131: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
> 
> 
> The "Association request to the driver failed" will
> be shown even without "-d". Also note that the association
> seems to actually work, e.g. I can ping throught the
> connection.

Could this be related to the problem Maxim has been seeing? I'm not sure
how else this could happen since you seem to auth but then assoc doesn't
work, but I can't see how that could possibly happen.

johannes
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 801 bytes
Desc: This is a digitally signed message part
Url : http://lists.shmoo.com/pipermail/hostap/attachments/20091010/6062dedb/attachment.pgp 


More information about the HostAP mailing list