How can I set WPS IE in 802.11 management frame with NDIS driver ?

이영신 youngsinlee at lge.com
Fri Jan 23 03:44:45 EST 2009


Sorry. It is already there.

----- Original Message ----- 
From: "이영신" <youngsinlee at lge.com>
To: <hostap at lists.shmoo.com>
Sent: Friday, January 23, 2009 5:05 PM
Subject: Re: How can I set WPS IE in 802.11 management frame with NDIS driver ?


> Hi.
> 
> I think the following OIDs seems to solve this problem. 
> NDISUIO_QUERY_OID and IOCTL_NDISUIO_QUERY_OID_VALUE, NDISUIO_SET_OID and IOCTL_NDISUIO_SET_OID_VALUE.
> 
> How about you ?
> 
> Thanks.
> /Youngsin.
> 
> ----- Original Message ----- 
> From: "이영신" <youngsinlee at lge.com>
> To: "Jouni Malinen" <j at w1.fi>; <hostap at lists.shmoo.com>
> Sent: Wednesday, January 21, 2009 10:00 AM
> Subject: Re: How can I set WPS IE in 802.11 management frame with NDIS driver ?
> 
> 
>>> I would expect that this would need to a vendor specific OID at least
>>> for NDIS 5 drivers.. Luckily, most of the WPS functionality is available
>>> without adding the WPS IE in Probe Request or (Re)Association Request
>>> frames.
>> 
>> Yes... However, I think the lucky only comes with infrastructure mode. In case of IBSS WPS scenario, STA needs to be activated as WPS registrar which has to encode WPS IE in probe response. So I think we should find another way to solve this problem because there is no available NDIS version supporting a vendor specific OID.
>> 
>> Thanks.
>> /Youngsin. 
>> 
>> ----- Original Message ----- 
>> From: "Jouni Malinen" <j at w1.fi>
>> To: <hostap at lists.shmoo.com>
>> Sent: Tuesday, January 20, 2009 8:34 PM
>> Subject: Re: How can I set WPS IE in 802.11 management frame with NDIS driver ?
>> 
>> 
>>> On Tue, Jan 20, 2009 at 07:35:28PM +0900, �̿��� wrote:
>>> 
>>>> It seems that there are no suitable OIDs to set WPS IEs in management frames in NDIS specification of 802.11 wireless LAN objects.  Is it right ? 
>>> 
>>> It depends a bit on which version of NDIS you are using. As far as NDIS
>>> 5 is concerned, in theory, setting OID_802_11_ASSOCIATION_INFORMATION
>>> could be used to add WPS IE into (re)association request, but I don't
>>> know whether any NDIS driver actually implements set for this OID. In
>>> addition, adding WPS IE to Probe Request would not work with this OID.
>>> 
>>> I would expect that this would need to a vendor specific OID at least
>>> for NDIS 5 drivers.. Luckily, most of the WPS functionality is available
>>> without adding the WPS IE in Probe Request or (Re)Association Request
>>> frames.
>>> 
>>> -- 
>>> Jouni Malinen                                            PGP id EFC895FA
>>> _______________________________________________
>>> HostAP mailing list
>>> HostAP at lists.shmoo.com
>>> http://lists.shmoo.com/mailman/listinfo/hostap
>>>


More information about the HostAP mailing list