Multiple BSSIDs with encryption method failed with BroadCom wireless driver

sun keyong sunkeyong at gmail.com
Mon Dec 28 04:08:14 EST 2009


Hi , post again

2009/12/23 sun keyong <sunkeyong at gmail.com>

> Hi,
>
> I use Broadcon wireless network interface card, I try to setup two BSSID,
> one with WPA encryption method, the other with WPA2 encryption method, I try
> to use hostapd to support the encryption method. The hostapd version is
> 0.6.9, I can use hostapd for one bssid with encryption method, if I try to
> set up both of them with encryption method by hostapd, the hostapd can not
> support this. The client cannot connect the second BSSID.
>
> I am not sure I configure correct or is there some limitation of hostapd of
> encryption for Multiple BSSID. If this is limitatioin of hostapd, do you
> have any schedule to fix this.
> The configure file is:
> interface=wl0
> driver=bcm
> bridge=br0
> ssid=test
> auth_algs=1
> wpa=1
> wpa_passphrase=11111111
> wpa_key_mgmt=WPA-PSK
> wpa_pairwise=TKIP CCMP
>
> bss=wl0.1
> ssid=bcm_test
> wpa=2
> wpa_passphrase=22222222
> wpa_key_mgmt=WPA-PSK
> wpa_pairwise=TKIP CCMP
>
> Thanks very
>
> Elvis
>
>



-- 
改变命运就得改变自己!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20091228/ffe8b90d/attachment-0001.htm 


More information about the HostAP mailing list