new to WPA - first try

ed in 92626 ed92626 at gmail.com
Sat Dec 19 20:08:41 EST 2009


Hi there, this is my first time trying to use wpa_supplicant. Can anyone see
what's
wrong. APN and passwords are correct. But in other dumps I've seen
wpa_driver_ralink_set_key should return something.

How do you troubleshoot this piece of software.??
==============================================
Initializing interface 'wlan0' conf '/usr/usr/local/etc/wpa.conf' driver
'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/usr/usr/local/etc/wpa.conf' ->
'/usr/usr/local/etc/wpa.conf'
Reading configuration file '/usr/usr/local/etc/wpa.conf'
ctrl_interface='/usr/usr/local/etc/wpa_supplicant'
ctrl_interface_group='0'
ap_scan=1
Line: 11 - start of a new network block
ssid - hexdump_ascii(len=4):
     50 41 52 4b                                       PARK
key_mgmt: 0x2
proto: 0x1
pairwise: 0x8
PSK (ASCII passphrase) - hexdump_ascii(len=11):
     * * * * * * * * * * * *                   JOHNPARK234
PSK (from passphrase) - hexdump(len=32): hidden
Line 25: removed CCMP from group cipher list since it was not allowed for
pairwise cipher
Priority group 0
   id=0 ssid='PARK'
Initializing interface (2) 'wlan0'
wpa_driver_ralink_init
ralink_set_iface_flags
wpa_driver_ralink_flush_pmkid
NDIS: OID_802_11_PMKID (flush) - hexdump(len=8): 08 00 00 00 00 00 00 00
Own MAC address: 00:0e:8e:13:dc:36

wpa_driver_ralink_get_bssid
wpa_driver_ralink_remove_key
wpa_driver_ralink_set_key
wpa_driver_ralink_get_bssid
wpa_driver_ralink_remove_key
wpa_driver_ralink_set_key
wpa_driver_ralink_get_bssid
wpa_driver_ralink_remove_key
wpa_driver_ralink_set_key
wpa_driver_ralink_get_bssid
wpa_driver_ralink_remove_key
wpa_driver_ralink_set_countermeasures: enabled=0
RSN: flushing PMKID list in the driver
wpa_driver_ralink_flush_pmkid
NDIS: OID_802_11_PMKID (flush) - hexdump(len=8): 08 00 00 00 00 00 00 00
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Using existing control interface directory.
ctrl_interface_group=0
chown[ctrl_interface]: Read-only file system
Failed to initialize control interface '/usr/usr/local/etc/wpa_supplicant'.
You may have another wpa_supplicant process already running or the file was
left by an unclean termination of wpa_supplicant in which case you will need
to manually remove this file before starting wpa_supplicant again.

Failed to add interface wlan0
State: DISCONNECTED -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_ralink_set_countermeasures: enabled=0
No keys have been configured - skip key clearing
Cancelling scan request
Cancelling authentication timeout
wpa_driver_ralink_deinit
wpa_driver_ralink_flush_pmkid
NDIS: OID_802_11_PMKID (flush) - hexdump(len=8): 08 00 00 00 00 00 00 00
ralink_set_iface_flags
#
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20091219/9d09b4eb/attachment.htm 


More information about the HostAP mailing list