WPS support in wpa_supplicant
CTuffli at dspg.com
Fri Aug 29 10:14:09 EDT 2008
> -----Original Message-----
> From: Raghavendra [mailto:s.raghu at samsung.com]
> Sent: Friday, August 29, 2008 3:45 AM
> To: Chuck Tuffli; hostap at lists.shmoo.com
> Subject: Re: WPS support in wpa_supplicant
> I applied wps patch(dated 15th August 2008) against
> wpa_supplicant-0.5.10. I successfully compiled it. I am using marvell
> driver gspi8686. I am enabling wpa_supplicant as below.
> ./wpa_supplicant -Dwext -ieth0 -c./wpa.conf -w -ddd
> I have following doubts:
> 1. Whether I need AP that supports WPS or Is there a way to test
> without using AP?
Yes, you will need an AP that support WPS. Many vendors support WPS at
this point, but I have had good luck with the DLink DGL-4500 and the
> 2. Whether I should change something in gspi8686 driver?
The two kernel driver changes I needed to make were to pass the WPS IE
in the probe response back to the supplicant and include the WPS IE in
the probe request and association request packets.
More information about the HostAP