WPA - AP association Issue
maloomnahi at indiatimes.com
Wed Oct 31 06:55:28 EDT 2007
Thanks for the suggestions. I have tried them and following are the results.
The STA associates to some other AP outside my testing devices which does not have any security enabled. If I set the SSID, it does not and hence I set the SSID for the interface always.
I have tried many combinations of the CONF file settings and the combined one is as follows:
[TLS CCMP based association] - All combinations used
[PSK Based Association] - All combinations used
But none of these settings in any combination has helped me attain the association for more then 0.5 minute.
In the last example I provided, it was WPA-PSK, but I have tested the different EAP protocols and for every EAP based association its giving the same problem.
I have even tried switching the SSL engine ON, setting RADIUS identity etc, but none helped.
I have compiled the WPA again with changes to .CONFIG (like Mr. Bryan suggested earlier) with the current CONF file I wanted to use and still the result is the same.
A] What could be the other possible solution to it?
B] Is it that the Associated state instigates a disassociation automatically?
Looking forward to your comments
My life has changed. What about yours?
Log on to the new Indiatimes Mail and Live out of the Inbox!
More information about the HostAP