hostapd unknown errors

Dimitris Theoharis dtheoharis at gmail.com
Sun Apr 1 13:24:52 EDT 2007


no i do not but speaking of confusing clients i have another problem.
I have bridged eth0 and wlan0 like this :



brctl addbr br0
brctl addif br0 eth0
brctl addif br0 wlan0
ifconfig br0 up
dhclient -i br0

and it gets an IP fine , but it does NOT give out IPs to other
clients. What am i missing here?




On 4/1/07, Jouni Malinen <j at w1.fi> wrote:
> On Sun, Apr 01, 2007 at 08:27:31AM +0100, Dimitris Theoharis wrote:
> > starts fine , then it prints this stuff. Not sure if thats an error or not
>
> > RATE[3] rate=110 flags=0x40
> > Could not set passive scanning: Unknown error 4294967295
> > Flushing old station entries
> > Deauthenticate all stations
> > Received management frrame - hexdump(len=146): 00 12 3f d1 d9 21 00 e0
> > 18 b6 b0 00 08 00 45 10 00 84 7e 79 40 00 40 06 a7 d4 0a 00 00 0a 0a
> > 00 00 0d 00 16 b8 d5 03 a1 0c ab 01 ea 39 59 80 18 10 e0 9f 77 00 00
> > 01 01 08 0a 02 1f 43 8b 00 01 95 3a 6e 1a 93 c0 2c e6 60 55 78 f0 02
> > ff e9 19 e0 18 21 3b 60 8b 9b ed 3f 36 f9 b5 91 ed e6 cc 8e 3f 58 c0
> > fa 3a 79 67 23 20 d6 d9 13 2d ed b9 39 db 9b c9 19 63 91 24 8d 85 30
> > 07 ff 94 a9 1f 58 53 6b 07 a2 29 80 53 49 5e 71 f9 a0 f1 af 1e 01 d2
> > MGMT
> > MGMT: BSSID=00:84:7e:79:40:00 not our address
>
> This is all fine.
>
> > Wireless event: cmd=0x8c04 len=20
>
> IWEVEXPIRED
>
> > Wireless event: cmd=0x8b04 len=12
> > Wireless event: cmd=0x8b04 len=12
>
> ... SIOCSIWFREQ
>
> Are you running some software that changes the channel constantly
> (iwconfig wlan0 channel N)? Those would likely show up as these events
> here (and would likely confuse most of the stations trying to use this
> AP)..
>
> --
> Jouni Malinen                                            PGP id EFC895FA
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
>



More information about the HostAP mailing list