Connection problems

[peace bwitchu]

I changed ap_scan to 2 and this is what I get now.


eapol_version=1
ap_scan=2
Line: 4 - start of a new network block
ssid - hexdump_ascii(len=9):
     32 33 32 33 39 63 32 32 32                       
work
scan_ssid=1 (0x1)
key_mgmt: 0x8
eap methods - hexdump(len=2): 19 00
identity - hexdump_ascii(len=13):
     31 33 33 31 34 53 37 32 39 33 37 3c 34           
workad\user1
password - hexdump_ascii(len=8): [REMOVED]
phase1 - hexdump_ascii(len=20):
     39 3e 33 3c 35 34 35 3f 34 3c 33 3f 3c 35 3e 33  
include_tls_leng
     74 68 3d 31                                      
th=1
phase2 - hexdump_ascii(len=13):
     61 75 74 68 3d 4d 53 43 48 41 50 56 32           
auth=MSCHAPV2
Priority group 0
   id=0 ssid='work'
Initializing interface (2) 'eth1'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=18 WE(source)=18
enc_capa=0xf
  capabilities: key_mgmt 0xf enc 0xf
Own MAC address: 00:13:ce:65:80:75
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0
seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0
seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0
seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0
seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
Setting scan request: 0 sec 100000 usec
Added interface eth1
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'work'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: clearing own WPA/RSN IE
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_associate
Setting authentication timeout: 60 sec 0 usec
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8b06 len=8
Wireless event: cmd=0x8b1a len=22
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface eth1
State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
wpa_driver_wext_set_drop_unencrypted
wpa_driver_wext_set_countermeasures
No keys have been configured - skip key clearing

--- Jouni Malinen <jkmaline at cc.hut.fi> wrote:

> On Fri, Sep 01, 2006 at 01:04:47PM -0700, peace
> bwitchu wrote:
> 
> > I can't connect to our Cisco 802.1x wireless
> network.
> > 
> > Here is my config
> 
> > ap_scan=0
> 
> ap_scan=0 is in practice only used with wired
> networks. You will either
> need to use ap_scan=1 or ap_scan=2 here for wireless
> connection.
> 
> -- 
> Jouni Malinen                                       
>     PGP id EFC895FA
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com