Connection problems

peace bwitchu peacebwitchu at yahoo.com
Fri Sep 1 16:04:47 EDT 2006


Centos 4.4
wpasupplicant0.4.9
ipw2200 firmware 2.4

I can't connect to our Cisco 802.1x wireless network.

Here is my config

eapol_version=1
ap_scan=0

 network={
         ssid="work"
         scan_ssid=1
         key_mgmt=IEEE8021X
         eap=PEAP
         identity="workad\user1"
         password="user5454"
         phase1="include_tls_length=1"
         phase2="auth=MSCHAPV2"
}


Here is my output using: wpa_supplicant -Dwext -ieth1
-c/etc/wpa_supplicant.conf -ddd

Initializing interface 'eth1' conf
'/etc/wpa_supplicant.conf' driver 'wext'
ctrl_interface 'N/A'
Configuration file '/etc/wpa_supplicant.conf' ->
'/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
eapol_version=1
ap_scan=0
Line: 4 - start of a new network block
ssid - hexdump_ascii(len=9):
     42 63 62 43 69 6f 42 72 72                       

work
scan_ssid=1 (0x1)
key_mgmt: 0x8
eap methods - hexdump(len=2): 19 00
identity - hexdump_ascii(len=13):
     52 63 42 31 34 3c 37 32 39 33 37 3c 34           
workad\user1
password - hexdump_ascii(len=8): [REMOVED]
phase1 - hexdump_ascii(len=20):
     39 3e 33 3c 35 34 35 3f 34 3c 33 3f 3c 35 3e 37  
include_tls_leng
     74 68 3d 31                                      
th=1
phase2 - hexdump_ascii(len=13):
     61 75 74 68 3d 4d 53 43 48 41 50 56 32           
auth=MSCHAPV2
Priority group 0
   id=0 ssid='work'
Initializing interface (2) 'eth1'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=18 WE(source)=18
enc_capa=0xf
  capabilities: key_mgmt 0xf enc 0xf
Own MAC address: 00:13:ce:65:80:75
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0
seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0
seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0
seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0
seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
Setting scan request: 0 sec 100000 usec
Added interface eth1
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface eth1
State: DISCONNECTED -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
wpa_driver_wext_set_drop_unencrypted
wpa_driver_wext_set_countermeasures
No keys have been configured - skip key clearing
Cancelling scan request



Thanks for the help

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 



More information about the HostAP mailing list