wpa_supplicant with bridge
msmith at cbnco.com
Tue May 16 16:35:50 EDT 2006
On Tue, 16 May 2006, Chris Baechle wrote:
> Unlike before, it now works as at least a regular wireless client
> (without bridging of any sort). However, when I add the interface to
> the bridge (brctl addif br0 ath0), it disconnects from the AP. I tried
> doing it in different orders with no such luck.
> Here's my order of doing things:
> ifconfig eth0 0.0.0.0
> ifconfig ath0 0.0.0.0
> brctl addbr br0
> brctl addif br0 eth0
> ifconfig br0 up
> brctl setfd br0 0
> wpa_supplicant -c /etc/wpa_supplicant.conf -Dmadwifi -iath0 -bbr0 -ddd
> brctl addif br0 ath0
I do the same, almost:
- "iwpriv ath0 wds 1" before "ifconfig ath0 0.0.0.0"
- add ath0 to br0 before "ifconfig br0 up"
- "setfd br0 0" before "ifconfig br0 up"
This shouldn't make a difference, but it might: I set an IP address on my
br0 when I bring it up.
More information about the HostAP