WPA2 problems using wpa_supplicant

[Dimitris Theoharis]

wpa_supplicant -i wlan0 -D hostap -c /etc/wpa_supplicant.conf -dd
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver
'hostap' ctrl_interface 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0
Line: 6 - start of a new network block
ssid - hexdump_ascii(len=6):
     44 69 6d 4e 65 74                                 DimNet
proto: 0x1
key_mgmt: 0x2
pairwise: 0x18
group: 0x1e
PSK (ASCII passphrase) - hexdump_ascii(len=14): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='DimNet'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=19 WE(source)=18 enc_capa=0xf
  capabilities: key_mgmt 0xf enc 0xf
Added alternative ifindex 4 (wifi0) for wireless events
Added alternative ifindex 4 (wifi0) for wireless events
Own MAC address: 00:02:6f:30:df:45
wpa_driver_hostap_set_wpa: enabled=1
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
Driver does not support WPA.
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_countermeasures: enabled=0
wpa_driver_hostap_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Using existing control interface directory.
Added interface wlan0
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'wifi0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b19 len=8
Received 177 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:0f:b5:93:f9:67 ssid='DimNet' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
   skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b19 len=8
Received 177 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:0f:b5:93:f9:67 ssid='DimNet' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
   skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b19 len=8
Received 177 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:0f:b5:93:f9:67 ssid='DimNet' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
   skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b19 len=8
Received 177 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:0f:b5:93:f9:67 ssid='DimNet' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
   skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b19 len=8
Received 177 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:0f:b5:93:f9:67 ssid='DimNet' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
   skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b19 len=8
Received 177 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:0f:b5:93:f9:67 ssid='DimNet' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
   skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
State: SCANNING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_hostap_set_wpa: enabled=0
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
Failed to disable WPA in the driver.
wpa_driver_hostap_set_drop_unencrypted: enabled=0
wpa_driver_hostap_set_countermeasures: enabled=0
No keys have been configured - skip key clearing
Control interface directory not empty - leaving it behind
Cancelling scan request



kernel 2.6.15.6 , Debian and Kelmo's modified wpasup package. I am in
the process of upgrading my firwmare to a much newer one

On 3/26/06, Jouni Malinen <jkmaline at cc.hut.fi> wrote:
> On Sun, Mar 26, 2006 at 08:41:04PM +0300, Dimitris Theoharis wrote:
>
> > Trying to get prism2.5 using hostap to do wpa-psk/wpa2-psk tkip & aes
> > but i get this error and then it just stops
>
> >  wpa_supplicant -i wlan0 -D hostap -c /etc/wpa_supplicant.conf
> > ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
>
> Which version of the kernel, driver, and wpa_supplicant are you using?
> Can you please send full debug output (i.e., add -dd to wpa_supplicant
> command line) and 'dmesg' output after having tried starting up
> wpa_supplicant? Can you using iwconfig to configure the driver?
>
> --
> Jouni Malinen                                            PGP id EFC895FA
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
>