Problem with Hostap and wpa_supplicant :(

Alric Aneron aluminum3458 at yahoo.com
Thu Jun 22 12:25:45 EDT 2006


added ap_scan=2 this is what I get:
$wpa_supplicant -iwlan0 -c/etc/wpa_supplicant/wpa_supplicant.conf -Dhostap -wdd



(wpa_cli says Status=Associating)


eapol_version=1
ap_scan=2
Line: 21 - start of a new network block
scan_ssid=1 (0x1)
ssid - hexdump_ascii(len=10):
     sssssssssssssssssssssssss                     mynet
pairwise: 0x18
key_mgmt: 0x2
PSK - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='mynet'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=19 WE(source)=18 enc_capa=0xf
  capabilities: key_mgmt 0xf enc 0xf
Added alternative ifindex 3 (wifi0) for wireless events
Added alternative ifindex 3 (wifi0) for wireless events
Own MAC address: xxxxxxxxxxx
wpa_driver_hostap_set_wpa: enabled=1
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
Driver does not support WPA.
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_countermeasures: enabled=0
wpa_driver_hostap_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Added interface wlan0
Wireless event: cmd=xxxxx len=8
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'mynet'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 2
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): xxxxxxxxxxxxxxxxxxxxxx
No keys have been configured - skip key clearing
wpa_driver_hostap_set_drop_unencrypted: enabled=1
State: SCANNING -> ASSOCIATING
wpa_driver_hostap_associate
Setting authentication timeout: 60 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8b06 len=8
Wireless event: cmd=0x8b1a len=19


Thanks for your help man.
Any suggestions?

Al

		
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls.  Great rates starting at 1¢/min.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20060622/2fed2778/attachment.htm 


More information about the HostAP mailing list