wpa_supplicant doesn't work :(

[Alric Aneron]

Thanks,
This is the output from lsmod:

hostap_pci             53237  0
hostap                102345  1 hostap_pci
nvram                   8393  0
orinoco_pci             7757  0
orinoco                36565  1 orinoco_pci
hermes                  7489  2 orinoco_pci,orinoco
ohci1394               31749  0

Looks like both orinoco and hostap are loaded, but I'm pretty sure hostap is the one that's used because my wireless interface is called wlan0 and I have wifi0 there too.  I am not sure what version though, it came with my FC5 installation so I'm pretty sure it's quite new.
here is the debug output:
>>  wpa_supplicant -iwlan0 -c/etc/wpa_supplicant/wpa_supplicant.conf -Dhostap -wdd

It just keeps looping at the following output (Maybe because my ESSID isn't broadcasted it misses it?):

Scan results: 1
Selecting BSS from priority group 0
0: 00:16:17:0c:a4:71 ssid='mynet' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
   skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b19 len=8
Received 300 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:84:a8:22:21:cf ssid='default' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
   skip - no WPA/RSN IE
1: 00:1c:92:0b:ac:2a ssid='default' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=10):
     23 52 6c 6a 24 1a 24 62 6f 2a                     mynetpass
Wireless event: cmd=0x8b19 len=8
Received 181 bytes of scan results (1 BSSes)
Scan results: 1



Jouni Malinen <jkmaline at cc.hut.fi> wrote: On Tue, May 30, 2006 at 07:02:37AM -0700, Alric Aneron wrote:

> Hello, I followed instructions to setup the wpa_supplicant, and here is what I did:
> I dowloaded the RPM for fc4 (I have fc5), installed it, and here is my wpa_supplicant.config:

Which driver version are you using?

> My ESSID isn't broadcasted, so maybe it has trouble picking it up.  I run the following command to start up wpa_supplicant:
> wpa_supplicant -iwlan0 -c/etc/wpa_supplicant/wpa_supplicant.conf -Dhostap -w
> Giving me the following output:
..

Could you please send debug output (i.e., add -dd to that command line)?
Without it, there is not enough verbosity to figure out what is
happening.

-- 
Jouni Malinen                                            PGP id EFC895FA
_______________________________________________
HostAP mailing list
HostAP at shmoo.com
http://lists.shmoo.com/mailman/listinfo/hostap


		
---------------------------------
Ring'em or ping'em. Make  PC-to-phone calls as low as 1¢/min with Yahoo! Messenger with Voice.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20060601/bcb8542e/attachment.htm