hostap-driver 0.4.7 and Prism2 PCMCIA initialization failure: "wifi0: hfa384x_cmd: entry still in list?"

Aleksander Adamowski aleksander.adamowski.hostap at altkom.pl
Sun Feb 12 20:10:27 EST 2006


Aleksander Adamowski wrote:

>Feb 12 18:23:55 laptop kernel: io->flags = 0x0046, io.base=0x0000, len=64
>Feb 12 18:23:55 laptop kernel: hostap_cs: Registered netdevice wifi0
>Feb 12 18:23:55 laptop kernel: hostap_cs: index 0x01: Vcc 5.0, irq 3, io 
>0x0100-0x013f
>  
>
BTW, here's the output from /proc/interrupts (the card can be seen as 
occupying IRQ3 with the name "0.0"):

# cat /proc/interrupts
           CPU0      
  0:    9301779          XT-PIC  timer
  1:       1179          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  3:         10          XT-PIC  0.0
  8:          1          XT-PIC  rtc
 11:      21406          XT-PIC  uhci_hcd, yenta, Intel 440MX
 12:       5552          XT-PIC  i8042
 14:      94782          XT-PIC  ide0
NMI:          0
LOC:          0
ERR:          0
MIS:          0

>Feb 12 18:23:55 laptop kernel: prism2_hw_init: initialized in 196 ms
>Feb 12 18:23:57 laptop kernel: wifi0: hfa384x_cmd: entry still in list? 
>(entry=cd38f520, type=0, res=0)
>Feb 12 18:23:57 laptop kernel: wifi0: hfa384x_cmd: command was not 
>completed (res=0, entry=cd38f520, type=0, cmd=0x0001, param0=0x0000, 
>EVSTAT=8000 INTEN=0010)
>Feb 12 18:23:57 laptop kernel: wifi0: MAC port 0 enabling failed
>Feb 12 18:23:57 laptop kernel: wifi0: could not enable MAC port
>  
>

-- 
Best Regards,
    Aleksander Adamowski
        GG#: 274614
        ICQ UIN: 19780575 
	http://olo.ab.altkom.pl




More information about the HostAP mailing list