kernel 2.6.17.14 & WL 200 & udev

Andrzej Boron andrzej.boron at impol.net.pl
Sat Dec 9 20:05:07 EST 2006


Hi

Anyone know why hostap driver not starting ???


lspci -vvv

0000:00:0e.0 PCMCIA bridge: Cirrus Logic CL 6729 (rev 07)
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping+ SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at 2030 [size=4]




lspcmcia -vv



Socket 0 Bridge:        [pd6729]        (bus ID: 0000:00:0e.0)
        Configuration:  state: on       ready: yes
                        Voltage: 3.3V Vcc: 3.3V Vpp: 3.3V
                        Available IRQs: none
                        Available ioports:      0x00000100 - 0x0000016f
                                                0x00000178 - 0x0000021f
                                                0x00000230 - 0x00000267
                                                0x00000270 - 0x000002e7
                                                0x000002f0 - 0x0000032f
                                                0x00000338 - 0x0000036f
                                                0x00000380 - 0x00000387
                                                0x00000390 - 0x000003f7
                                                0x00000400 - 0x000004ff
                                                0x00000800 - 0x000008ff
                                                0x00000a00 - 0x00000aff
                                                0x00000c08 - 0x00000c4f
                                                0x00000c58 - 0x00000c7f
                                                0x00000c88 - 0x00000cf7
                        Available iomem:        0x000c0000 - 0x000fffff
                                                0xa0000000 - 0xa0ffffff
Socket 0 Device 0:      [-- no driver --]       (bus ID: 0.0)
        Configuration:  state: on
        Product Name:   Compaq WL200_11Mbps_Wireless_PCI_Card
        Identification: manf_id: 0x0138 card_id: 0x0002
                        function: 6 (network)
                        prod_id(1): "Compaq" (0x54f7c49c)
                        prod_id(2): "WL200_11Mbps_Wireless_PCI_Card" 
(0x15a75e5b)
                        prod_id(3): --- (---)
                        prod_id(4): --- (---)
Socket 1 Bridge:        [pd6729]        (bus ID: 0000:00:0e.0)
        Configuration:  state: on       ready: yes
                        Available IRQs: none
                        Available ioports:      0x00000100 - 0x0000016f
                                                0x00000178 - 0x0000021f
                                                0x00000230 - 0x00000267
                                                0x00000270 - 0x000002e7
                                                0x000002f0 - 0x0000032f
                                                0x00000338 - 0x0000036f
                                                0x00000380 - 0x00000387
                                                0x00000390 - 0x000003f7
                                                0x00000400 - 0x000004ff
                                                0x00000800 - 0x000008ff
                                                0x00000a00 - 0x00000aff
                                                0x00000c08 - 0x00000c4f
                                                0x00000c58 - 0x00000c7f
                                                0x00000c88 - 0x00000cf7
                        Available iomem:        0x000c0000 - 0x000fffff
                                                0x60000000 - 0x60ffffff
                                                0xa0000000 - 0xa0ffffff



DMESG



Linux version 2.6.17.14 (root) (gcc version 4.1.2 20060901 (prerelease) 
(Debian 4.1.1-13)) #2 Sun Dec 10 01:01:48 CET 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
512MB LOWMEM available.
On node 0 totalpages: 131072
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 126976 pages, LIFO batch:31
DMI 2.1 present.
ACPI: RSDP (v000 COMPAQ                                ) @ 0x000e0010
ACPI: RSDT (v001 COMPAQ CPQB053  0x19990821  0x00000000) @ 0x000e0080
ACPI: FADT (v001 COMPAQ SCARAB   0x00000001  0x00000000) @ 0x000e00cc
ACPI: SSDT (v001 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000b) @ 0x000e09c3
ACPI: SSDT (v001 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000b) @ 0x000e19c0
ACPI: SSDT (v001 COMPAQ      PME 0x00000001 MSFT 0x0100000b) @ 0x000e2134
ACPI: DSDT (v001 COMPAQ     DSDT 0x00000001 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xf808
Allocating PCI resources starting at 30000000 (gap: 20000000:dffc0000)
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 597.020 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 516076k/524288k available (2199k kernel code, 7732k reserved, 676k 
data, 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1194.97 BogoMIPS 
(lpj=2389949)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 01
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 0k freed
ACPI: setting ELCR to 0200 (from 0800)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xed8e3, last bus=1
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region f800-f83f claimed by PIIX4 ACPI
PCI quirk: region fc00-fc0f claimed by PIIX4 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a 
report
pnp: 00:0c: ioport range 0x15c-0x15d has been reserved
pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0d: ioport range 0xf800-0xf81f could not be reserved
pnp: 00:0d: ioport range 0xf820-0xf83f has been reserved
pnp: 00:0d: ioport range 0xfc00-0xfc0f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: 1000-1fff
  MEM window: 40000000-400fffff
  PREFETCH window: 41000000-41ffffff
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 65536 bind 32768)
TCP reno registered
Machine check exception polling timer started.
* Found PM-Timer Bug on this chipset. Due to workarounds for a bug,
* this time source is slow.  Consider trying other time sources (clock=)
audit: initializing netlink socket (disabled)
audit(1165713256.200:1): initialized
SGI XFS with security attributes, no debug enabled
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
ACPI: Power Button (CM) [PBTN]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
lp: driver loaded but no devices found
Real Time Clock Driver v1.12ac
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> 
IRQ 11
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0d.0: 3Com PCI 3c905 Boomerang 100baseTx at 00012080.
orinoco 0.15rc3 (David Gibson <hermes at gibson.dropbear.id.au>, Pavel Roskin 
<proski at gnu.org>, et al)
orinoco_pci 0.15rc3 (Pavel Roskin <proski at gnu.org>, David Gibson 
<hermes at gibson.dropbear.id.au> & Jean Tourrilhes <jt at hpl.hp.com>)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:14.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x2020-0x2027, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x2028-0x202f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: WDC WD800JB-00FSA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, 
UDMA(33)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> 
IRQ 11
pd6729: Cirrus PD6729 PCI to PCMCIA Bridge at 0x2030 on irq 11
pd6729: PCI card interrupts, PCI status changes
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: raid1 personality registered for level 1
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 
10:27:24 2006 UTC).
ALSA device list:
  No soundcards found.
oprofile: using timer interrupt.
netem: version 1.2
u32 classifier
    Perfomance counters on
ip_conntrack version 2.4 (4096 buckets, 32768 max) - 224 bytes per conntrack
input: AT Translated Set 2 keyboard as /class/input/input0
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Bridge firewalling registered
Ebtables v2.0 registered
ieee80211: 802.11 data/management/control stack, git-1.1.7
ieee80211: Copyright (C) 2004-2005 Intel Corporation 
<jketreno at linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
Using IPI Shortcut mode
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 148k freed
pccard: PCMCIA card inserted into slot 0
cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x220-0x22f 0x268-0x26f 
0x2e8-0x2ef 0x330-0x337 0x370-0x37f 0x388-0x38f 0x3f8-0x3ff
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: excluding 0xc00-0xc07 0xc50-0xc57 0xc80-0xc87 
0xcf8-0xcff
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x220-0x22f 0x268-0x26f 
0x2e8-0x2ef 0x330-0x337 0x370-0x37f 0x388-0x38f 0x3f8-0x3ff
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: excluding 0xc00-0xc07 0xc50-0xc57 0xc80-0xc87 
0xcf8-0xcff
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia: registering new device pcmcia0.0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a NS16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS3 at I/O 0x2e8 (irq = 3) is a NS16550A
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> 
IRQ 11
e100: eth1: e100_probe: addr 0x42200000, irq 11, MAC addr 00:08:C7:FF:57:13
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:14.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> 
IRQ 11
uhci_hcd 0000:00:14.2: UHCI Host Controller
uhci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:14.2: irq 11, io base 0x00002000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Adding 506008k swap on /dev/hda9.  Priority:-1 extents:1 across:506008k
EXT3 FS on hda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect 
breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html 
for details.
NET: Registered protocol family 15
e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> 
IRQ 11
eth0:  setting full-duplex.
ttyS2: LSR safety check engaged!
ttyS2: LSR safety check engaged!
CAPI Subsystem Rev 1.1.2.8
capifs: Rev 1.1.2.3
capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs)
ip_tables: (C) 2000-2006 Netfilter Core Team
IPP2P v0.8.2 loading





More information about the HostAP mailing list