wpa_supplicant v0.5.4 and ndiswrapper 1.21 not working

Brian J. Murrell brian at interlinx.bc.ca
Tue Aug 8 12:25:15 EDT 2006


I've upgraded kernel and ndiswrapper here and now wpa_supplicant is not
working any more.  :-(

My wpa_supplicant command-line and output:

# /usr/sbin/wpa_supplicant -dd -i wlan0 -c /etc/wpa_supplicant.conf -D ndiswrappe
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'ndiswrapper' ctrl_interface 'N/A' bridge 'N/A
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0
eapol_version=1
ap_scan=1
fast_reauth=1
opensc_engine_path='/usr/lib/opensc/engine_opensc.so'
pkcs11_engine_path='/usr/lib/opensc/engine_pkcs11.so'
pkcs11_module_path='/usr/lib/pkcs11/opensc-pkcs11.so'
Line: 700 - start of a new network block
ssid - hexdump_ascii(len=9):
     69 6c 69 6e 78 5f 77 70 61                        ilinx_wpa       
PSK - hexdump(len=32): [REMOVED]
scan_ssid=1 (0x1)
Priority group 0
   id=0 ssid='ilinx_wpa'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=20 WE(source)=18 enc_capa=0x5
  capabilities: key_mgmt 0x5 enc 0x7
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:90:4b:b0:22:08
Driver does not support WPA.
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
Setting scan request: 0 sec 100000 usec
Added interface wlan0
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=9):
     69 6c 69 6e 78 5f 77 70 61                        ilinx_wpa       
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 258 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:12:17:41:37:c8 ssid='ilinx_wpa' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:12:17:41:37:c8 (SSID='ilinx_wpa' freq=2442 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
WEXT: Operstate: linkmode=-1, operstate=5
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto


Authentication with 00:00:00:00:00:00 timed out.
Added BSSID 00:12:17:41:37:c8 into blacklist
State: ASSOCIATING -> DISCONNECTED
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 258 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:12:17:41:37:c8 ssid='ilinx_wpa' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:12:17:41:37:c8 (SSID='ilinx_wpa' freq=2442 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
WEXT: Operstate: linkmode=-1, operstate=5
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Authentication with 00:00:00:00:00:00 timed out.
BSSID 00:12:17:41:37:c8 blacklist count incremented to 2
State: ASSOCIATING -> DISCONNECTED
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=9):
     69 6c 69 6e 78 5f 77 70 61                        ilinx_wpa       
Scan timeout - try to get results
Received 258 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:12:17:41:37:c8 ssid='ilinx_wpa' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
   skip - blacklisted
No APs found - clear blacklist and try again
Removed BSSID 00:12:17:41:37:c8 from blacklist (clear)
Selecting BSS from priority group 0
0: 00:12:17:41:37:c8 ssid='ilinx_wpa' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:12:17:41:37:c8 (SSID='ilinx_wpa' freq=2442 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
WEXT: Operstate: linkmode=-1, operstate=5
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Authentication with 00:00:00:00:00:00 timed out.
Added BSSID 00:12:17:41:37:c8 into blacklist
State: ASSOCIATING -> DISCONNECTED
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 258 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:12:17:41:37:c8 ssid='ilinx_wpa' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:12:17:41:37:c8 (SSID='ilinx_wpa' freq=2442 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
WEXT: Operstate: linkmode=-1, operstate=5
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Authentication with 00:00:00:00:00:00 timed out.
BSSID 00:12:17:41:37:c8 blacklist count incremented to 2
State: ASSOCIATING -> DISCONNECTED
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=9):
     69 6c 69 6e 78 5f 77 70 61                        ilinx_wpa       
Scan timeout - try to get results
Received 258 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:12:17:41:37:c8 ssid='ilinx_wpa' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
   skip - blacklisted
No APs found - clear blacklist and try again
Removed BSSID 00:12:17:41:37:c8 from blacklist (clear)
Selecting BSS from priority group 0
0: 00:12:17:41:37:c8 ssid='ilinx_wpa' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:12:17:41:37:c8 (SSID='ilinx_wpa' freq=2442 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
WEXT: Operstate: linkmode=-1, operstate=5
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Authentication with 00:00:00:00:00:00 timed out.
Added BSSID 00:12:17:41:37:c8 into blacklist
State: ASSOCIATING -> DISCONNECTED
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 258 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:12:17:41:37:c8 ssid='ilinx_wpa' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:12:17:41:37:c8 (SSID='ilinx_wpa' freq=2442 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
WEXT: Operstate: linkmode=-1, operstate=5
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Authentication with 00:00:00:00:00:00 timed out.
BSSID 00:12:17:41:37:c8 blacklist count incremented to 2
State: ASSOCIATING -> DISCONNECTED
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=9):
     69 6c 69 6e 78 5f 77 70 61                        ilinx_wpa       
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
State: SCANNING -> DISCONNECTED
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Failed to disable WPA in the driver.
No keys have been configured - skip key clearing
WEXT: Operstate: linkmode=0, operstate=6
Removed BSSID 00:12:17:41:37:c8 from blacklist (clear)
Cancelling scan request

dmesg tells me the following:

# dmesg
...
ndiswrapper version 1.21 loaded (preempt=no,smp=no)
ndiswrapper: driver bcmwl5 () loaded
ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
ndiswrapper: using irq 5
wlan0: vendor: ''
wlan0: ndiswrapper ethernet device 00:90:4b:b0:22:08 using driver bcmwl5, 14E4:4301.5.conf
ndiswrapper (set_encr_mode:690): setting encryption mode to 6 failed (C00000BB)
wlan0: encryption modes supported: WEP; TKIP with WPA
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready

I am trying to use ndiswrapper 1.21 with the bcmwl5 driver for the
Broadcom BCM4303 chipset.

Any ideas what is going wrong?  This is exactly the same WPA
configuration on both the client and router before the
ndiswrapper/wpa_supplicant upgrades.

b.

-- 
My other computer is your Microsoft Windows server.

Brian J. Murrell
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.shmoo.com/pipermail/hostap/attachments/20060808/7b175a27/attachment.pgp 


More information about the HostAP mailing list