Senao prism 2.5 card -- loading errors

Michael Krigsman mkrigsman at documentation.com
Sat Oct 1 09:53:01 EDT 2005


I have a Senao prism 2.5-based wireless card that does not load completely.
The error messages from the log are listed below.

A few points that may help troubleshoot:

1. I am running on a laptop with an internal Intel 2200 wireless card which
is also prism-based. It works perfectly.

2. The Senao works fine in Windows.

3. I am running Ubuntu 5.1 preview with kernel 2.6.12-9-386. 

Thank you!!

kernel [ 3313.568859] hostap_cs: wifi0: resetting card
kernel [ 3313.568876] prism2_pccard_cor_sreset: original COR 41
kernel [ 3313.773470] prism2_hw_init: initialized in 201 ms
kernel [ 3313.773485] prism2_enable_aux_port: was not disabled!?
kernel [ 3313.900600] prism2_enable_aux_port(0) timed out
kernel [ 3313.900602] wifi0: valid PDA not found
kernel [ 3314.124607] wifi0: hfa384x_setup_bap - timeout before
kernel [ 3314.124671] wifi0: hfa384x_set_rid (rid=fce0, len=2) - failed -
res=-110
kernel [ 3314.300508] wifi0: hfa384x_setup_bap - timeout before
kernel [ 3314.300544] wifi0: hfa384x_set_rid (rid=fc00, len=2) - failed -
res=-110
kernel [ 3314.300547] wifi0: Port type setting to 6 failed
kernel [ 3314.497316] wifi0: hfa384x_setup_bap - timeout before
kernel [ 3314.497375] wifi0: hfa384x_get_rid (rid=fc82, len=2) - failed -
res=-110
kernel [ 3779.380573] wifi0: Port type setting to 6 failed
kernel [ 3779.390901] Could not get RID for component NIC
kernel [ 3779.390907] hostap_cs: Initialization failed
kernel [ 3779.390910] prism2_config() failed
dhclient DHCPDISCOVER on wifi0 to 255.255.255.255 port 67 interval 4
kernel [ 3779.468506] wifi0: invalid skb->cb magic (0x00000000, expected
0xf08a36a2)
dhclient DHCPDISCOVER on wifi0 to 255.255.255.255 port 67 interval 9
kernel [ 4223.315526] wifi0: hfa384x_cmd: cmd_queue full
kernel [ 4223.315526] wifi0: hfa384x_cmd: cmd_queue full
kernel [ 4223.315526] wifi0: hfa384x_cmd: cmd_queue full 




More information about the HostAP mailing list