wpa_supplicant IPW2100 D-Link 524 problem

Pablo R. Canto pcanto at 4m.com.ar
Wed May 18 03:02:11 EDT 2005


Mi Config:
IBM T41 IPW2100
OS GNU/Linux FC3 kernel 2.6.11-1.14_FC3
ipw2100 version 1.1.0 patched with the recent 655 [1] as module
Wireless Extension v17
wpa_supplicant-0.4.0 (neither work with 0.3.8)

AP D-Link 524 WPA-PSK enable SSID=pablito PSK="my_passphrase"

[1]http://www.bughost.org/bugzilla/show_bug.cgi?id=655

###my wpa_supplicant.conf: #########
ctrl_interface=/var/run/wpa_supplicant
network={
        ssid="pablito"
        scan_ssid=1
        key_mgmt=WPA-PSK
        pairwise=CCMP TKIP
        group=CCMP TKIP WEP104 WEP40
        psk="my_passphrase"
}


my wpa_supplicand command string :
wpa_supplicant -c/etc/wpa_supplicant.conf -ieth1 -Dipw -ddd
[root at ix ipw2100-1.1.0]# wpa_supplicant -c/etc/wpa_supplicant.conf 
-ieth1 -Dipw -ddd
Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'ipw'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
Line: 6 - start of a new network block
ssid - hexdump_ascii(len=7):
     70 61 62 6c 69 74 6f                              pablito
scan_ssid=1 (0x1)
key_mgmt: 0x2
pairwise: 0x18
group: 0x1e
PSK (ASCII passphrase) - hexdump_ascii(len=12): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='pablito'
Initializing interface (2) 'eth1'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_ipw_init is called
ioctl[SIOCSIWPMKSA]: Operation not supported
Own MAC address: 00:0c:f1:42:91:8a
wpa_driver_ipw_set_wpa: enabled=1
wpa_driver_ipw_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_ipw_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_ipw_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_ipw_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_ipw_set_countermeasures: enabled=0
wpa_driver_ipw_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=7):
     70 61 62 6c 69 74 6f                              pablito
Scan timeout - try to get results
Received 273 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:0f:3d:35:c7:29 ssid='pablito' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
   selected
Trying to associate with 00:0f:3d:35:c7:29 (SSID='pablito' freq=0 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
wpa_driver_ipw_set_auth_alg: auth_alg=0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 
01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_ipw_set_drop_unencrypted: enabled=1
State: SCANNING -> ASSOCIATING
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8b1a len=20
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
Added BSSID 00:00:00:00:00:00 into blacklist
State: ASSOCIATING -> DISCONNECTED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
wpa_driver_ipw_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_ipw_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_ipw_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_ipw_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_ipw_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
CTRL-EVENT-TERMINATING - signal 2 received
State: DISCONNECTED -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_ipw_set_wpa: enabled=0
wpa_driver_ipw_set_drop_unencrypted: enabled=0
wpa_driver_ipw_set_countermeasures: enabled=0
Removed BSSID 00:00:00:00:00:00 from blacklist (clear)


I trie 2 weeks to do this work and i can't.

Tanks, Pablo.-

PD: helpppp!! :)




More information about the HostAP mailing list