AR5213 card with madwifi-bsd, hostapd-0.4.1,wpa_supplicant-0.4.1

and hansen and0806 at yahoo.dk
Tue Jun 7 04:05:40 EDT 2005


Hi again
not sure but try
"wpa_pairwise=TKIP CCMP" or "wpa_pairwise=TKIP TKIP"
for wpa2 or wpa
in both wpa.conf and hostapd.conf

4 days..try 4 weeks ;)) like me
Both hostapd wpa_supp. and madwifi
is highly powerfull software, they are working
also together but the faktor 11 risk is big
with all those options.
faktor 11 = userscreewups ;) i´m good for those

--- Victor Yeo wrote:

> good'day,
> 
> I've been trying to get WPA-PSK working on madwifi
> for 4 days, but failed. I keep getting this error
> message from hostapd:
> "WPA: EAPOL-Key timeout"
> 
> Please point out if i make silly mistakes along the
> way. Thanks.
> 
> 
> In hostapd.conf, i set the following:
> interface=ath0
> bridge=br0
> driver=madwifi
> logger_syslog=-1
> logger_syslog_level=2
> logger_stdout=-1
> logger_stdout_level=2
> debug=0
> dump_file=/tmp/hostapd.dump
> ctrl_interface=/var/run/hostapd
> ctrl_interface_group=0
> ssid=MyWireless
> macaddr_acl=0
> auth_algs=3
> eapol_key_index_workaround=0
> eap_authenticator=0
> own_ip_addr=127.0.0.1
> wpa=1
>
wpa_psk=f6ac76d5715d53a12af3f2b040b3f8ac7072a5c35d8fffe2589471796ddd3e5b
> wpa_key_mgmt=WPA-PSK
> wpa_pairwise=TKIP 
> wpa_group_rekey=600
> wpa_gmk_rekey=86400
> 

> In wpa_supplicant.conf:
> ctrl_interface=/var/run/wpa_supplicant
> ctrl_interface_group=0
> network={
>  ssid="MyWireless"
>  key_mgmt=WPA-PSK
>  #psk="secretpass"
> 
>
psk=f6ac76d5715d53a12af3f2b040b3f8ac7072a5c35d8fffe2589471796ddd3e5b
>  priority=5
>  pairwise=TKIP
>  group=TKIP
> }





More information about the HostAP mailing list