crashing!

Andrew Duane andrew at duaneville.com
Sat Jun 4 06:34:26 EDT 2005


Hi,

 

I have used ndiswrapper and wpa_supplicant for months on FC3 with
success, but recently I had a HDD failure and had to reinstall. Now im
getting lockups when I try to get wpa_supplicant running.

 

I have a linksys wmp54g wireless card and have installed ndiswrapper
v1.1 with the latest linksys drivers. This part of the process seemed to
go okay.

 

Now I have tried installing both wpa_supplicant 0.4.1 and 0.3.8 tna.
Here is the config I use:

 

.config file:

 

CONFIG_WIRELESS_EXTENSION=y

CONFIG_DRIVER_NDISWRAPPER=y

 

Wpa_supplicant.conf:

 

# allow frontend (e.g., wpa_cli) to be used by all users in 'wheel'
group

#ctrl_interface=/var/run/wpa_supplicant

#ctrl_interface_group=users

#

# home network; allow all valid ciphers

network={

        ssid="myssid"

        key_mgmt=WPA-PSK

        psk="mypass"

}

 

Had to comment out the ctrl_interface stuff cause I got an error about
reading the file?? Think I need to add another entry in .config to get
this working. It used to work though??

 

Anyway if I run wpa_supplicant with wlan0 interface up or down – it
crashes my pc (I’m using Fedora Core 4 Test 3)

 

Here is the output any help would be great!

 

[root at trantor wpa_supplicant-0.4.1]# wpa_supplicant -iwlan0
-c/etc/wpa_supplicant.conf -d

Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver
'default'

Configuration file '/etc/wpa_supplicant.conf' ->
'/etc/wpa_supplicant.conf'

Reading configuration file '/etc/wpa_supplicant.conf'

Priority group 0

   id=0 ssid='Foundation'

Initializing interface (2) 'wlan0'

ioctl[SIOCSIWPMKSA]: No such device

Own MAC address: 00:0c:41:61:d6:4f

Setting scan request: 0 sec 100000 usec

Wireless event: cmd=0x8b06 len=8

RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added

RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added

State: DISCONNECTED -> SCANNING

Starting AP scan (broadcast SSID)

Scan timeout - try to get results

Received 310 bytes of scan results (1 BSSes)

Scan results: 1

Selecting BSS from priority group 0

0: 00:0c:41:9d:f4:4a ssid='Foundation' wpa_ie_len=24 rsn_ie_len=0
caps=0x11

   selected

Trying to associate with 00:0c:41:9d:f4:4a (SSID='Foundation' freq=2452
MHz)

Cancelling scan request

Automatic auth_alg selection: 0x1

WPA: using IEEE 802.11i/D3.0

WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2

WPA: using GTK TKIP

WPA: using PTK TKIP

WPA: using KEY_MGMT WPA-PSK

WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02
01 00 00 50 f2 02 01 00 00 50 f2 02

No keys have been configured - skip key clearing

State: SCANNING -> ASSOCIATING

Setting authentication timeout: 5 sec 0 usec

Wireless event: cmd=0x8c02 len=205

Custom wireless event:
'ASSOCINFO(ReqIEs=000a466f756e646174696f6e010882848b9624b0486c32048c1298
60dd050010180100dd160050f20101000050f20201000050f20201000050f202
RespIEs=010882848b9624b0486c32048c129860dd06001018010100)'

Association info event

req_ies - hexdump(len=59): 00 0a 46 6f 75 6e 64 61 74 69 6f 6e 01 08 82
84 8b 96 24 b0 48 6c 32 04 8c 12 98 60 dd 05 00 10 18 01 00 dd 16 00 50
f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02

resp_ies - hexdump(len=24): 01 08 82 84 8b 96 24 b0 48 6c 32 04 8c 12 98
60 dd 06 00 10 18 01 01 00

assoc_wpa_ie - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01
00 00 50 f2 02 01 00 00 50 f2 02

Wireless event: cmd=0x8b15 len=20

Wireless event: new AP: 00:0c:41:9d:f4:4a

State: ASSOCIATING -> ASSOCIATED

Association event - clear replay counter

Associated to a new BSS: BSSID=00:0c:41:9d:f4:4a

No keys have been configured - skip key clearing

Associated with 00:0c:41:9d:f4:4a

Setting authentication timeout: 10 sec 0 usec

RX EAPOL from 00:0c:41:9d:f4:4a

Setting authentication timeout: 10 sec 0 usec

IEEE 802.1X RX: version=1 type=3 length=95

  EAPOL-Key type=254

State: ASSOCIATED -> 4WAY_HANDSHAKE

WPA: RX message 1 of 4-Way Handshake from 00:0c:41:9d:f4:4a (ver=1)

WPA: Renewed SNonce - hexdump(len=32): 04 5f e4 6c 16 93 a4 1f b8 a6 65
2a 94 33 e8 1a 6c b8 fe d4 de c3 ac bd 6b 31 35 33 30 80 2d a0

WPA: PMK - hexdump(len=32): [REMOVED]

WPA: PTK - hexdump(len=64): [REMOVED]

WPA: Sending EAPOL-Key 2/4

 

 

 


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.6.1 - Release Date: 03/06/2005
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20050604/a5387721/attachment.htm 


More information about the HostAP mailing list