WPA over WDS (was Re: [PATCH] Re: hostapd/wpa_supplicant - new development release v0.4.3)
nomesigas at gmail.com
Thu Jul 14 14:30:23 EDT 2005
> I believe this is becouse WDS frames are dealt from the firmware and never
> get to hostapd. before that code there is a check about the frame being
> ToDs or FromDS, dropping it if is neither one of the two.
The firmware sends the frame, hostapd receives it, and is discarded
due to the check you pointed out. I am working in a translator, so
instead of dropping it will transform the frame, i.e., take out the 4
address. I will post the code once I tested it and it is stable.
> wds links are created on the fly (see README) in master mode even if I
> don't know on what basis (beacon received or probes i guess). what happens
> after is out of standard so there's nothing decided.
I know. I create the wds links myself, problem is that whe hostap is
launched, it mantains its own list of associated STA.
> You can also do a non destructive scanning while in master mode
Yes? I will look into previous posts. The problem here resides in
force the other party into creating the wds link. My way of doing it
1-Scan in Managed mode
2-If Mesh eSSID found create WDS link
3-Associate in Manage mode
4-Change to Master mode
5-Begin WPA exchange
Problem resides in how the other party creates the WDS links. If you
do it yourself, hostapd never understand that this party is
associated, Thats why I have to associate in Managed modem so hostapd
will add the MAC STA to its list.
More information about the HostAP