ndiswrapper,Cisco Radius PEAP

John Knoxville peacebwitchu at gmail.com
Wed Feb 23 09:18:59 EST 2005


I am having problems getting associated with my Cisco AP and Radius
server.  I am using the latest ndiswrapper with the centrino wireless
card.  Here is my config and debug output.

eapol_version=1
ap_scan=1

 network={
         ssid="web"
         scan_ssid=1
         key_mgmt=IEEE8021X
         eap=PEAP
         identity="ad\peace"
         password="password"
         phase2="auth=MSCHAPV2"


wpa_supplicant -Dndiswrapper -iwlan0 -c/etc/wpa_supplicant.conf -ddd
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver
'ndiswrapper'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
eapol_version=1
ap_scan=1
Line: 4 - start of a new network block
ssid - hexdump_ascii(len=9):
     42 63 62 43 69 6f 42 72 72                        web
scan_ssid=1 (0x1)
key_mgmt: 0x8
eap methods - hexdump(len=2): 19 00
identity - hexdump_ascii(len=13):
     62 63 62 61 64 5c 67 72 69 73 77 6c 64            ad\peace
password - hexdump_ascii(len=8): [REMOVED]
phase2 - hexdump_ascii(len=13):
     61 75 74 68 3d 4d 53 43 48 41 50 56 32            auth=MSCHAPV2
Priority group 0
   id=0 ssid='web'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Own MAC address: 00:0c:f1:24:62:e2
Setting scan request: 0 sec 100000 usec
Wireless event: cmd=0x8b06 len=8
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=9):
     42 63 62 43 69 6f 42 72 72                        web
ioctl[SIOCSIWSCAN{,EXT}]: No such device
Failed to initiate AP scan.
Setting scan request: 10 sec 0 usec
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
Scan timeout - try to get results
Received 2171 bytes of scan results (11 BSSes)
Scan results: 11
Selecting BSS from priority group 0



Thanks for the help.



More information about the HostAP mailing list