can not connect to Cisco 1231 with WPA-PSK(wpa_supplicant 0.3.8 and madwifi)

YenJung Chang yenjung at gmail.com
Mon Feb 14 05:33:19 EST 2005


Hi, List,

I can not connect to Cisco 1231 with WPA-PSK.

Following is my configure file, wpa_supplicant.conf, and output message.
Any advice is appreciated.

I used wpa_supplicant 0.3.8 and madwifi.

--------wpa_supplicant.conf-------------
eapol_version=1
ap_scan=1
fast_reauth=1
network={
     proto=WPA
     ssid="Cisco1231g" 
     psk="12345678"
     auth_alg=OPEN 
     key_mgmt=WPA-PSK
     pairwise=TKIP 
     group=TKIP
} 
---------------------------------------------------------

--------output message-----------
Initializing interface 'ath0' conf '/etc/wpa_supplicant.conf' driver 'default'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
eapol_version=1
ap_scan=1
fast_reauth=1
Priority group 0
   id=0 ssid='Cisco1231g'
Initializing interface (2) 'ath0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Own MAC address: 00:30:ab:24:fc:ef
wpa_driver_madwifi_set_wpa: enabled=1
wpa_driver_madwifi_del_key: keyidx=0
wpa_driver_madwifi_del_key: keyidx=1
wpa_driver_madwifi_del_key: keyidx=2
wpa_driver_madwifi_del_key: keyidx=3
wpa_driver_madwifi_set_countermeasures: enabled=0
wpa_driver_madwifi_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b1a len=12
Wireless event: cmd=0x8b19 len=12
Received 4095 bytes of scan results (18 BSSes)
Scan results: 18
Selecting BSS from priority group 0
0: 00:0f:b5:36:c7:fd ssid='spencer-602v3' wpa_ie_len=0 rsn_ie_len=22
   skip - SSID mismatch
1: 00:0f:b5:0f:27:df ssid='*spencer*' wpa_ie_len=24 rsn_ie_len=0
   skip - SSID mismatch
2: 00:09:5b:f7:14:8c ssid='3067' wpa_ie_len=24 rsn_ie_len=0
   skip - SSID mismatch
3: 00:03:7f:bf:06:f4 ssid='test goose' wpa_ie_len=26 rsn_ie_len=0
   skip - SSID mismatch
4: 00:0f:b5:35:4f:19 ssid='wifi' wpa_ie_len=0 rsn_ie_len=22
   skip - SSID mismatch
5: 00:12:00:d7:4f:20 ssid='Cisco1231g' wpa_ie_len=26 rsn_ie_len=0
   selected
Trying to associate with 00:12:00:d7:4f:20 (SSID='Cisco1231g' freq=2462 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
Overriding auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02
01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_madwifi_set_drop_unencrypted: enabled=1
wpa_driver_madwifi_associate
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8b1a len=23
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:12:00:d7:4f:20
Association event - clear replay counter
Associated to a new BSS: BSSID=00:12:00:d7:4f:20
No keys have been configured - skip key clearing
Associated with 00:12:00:d7:4f:20
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0)
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
RX EAPOL from 00:12:00:d7:4f:20
Setting authentication timeout: 10 sec 0 usec
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=95
  EAPOL-Key type=254
WPA: RX message 1 of 4-Way Handshake from 00:12:00:d7:4f:20 (ver=1)
WPA: WPA IE for msg 2/4 - hexdump(len=24): dd 16 00 50 f2 01 01 00 00
50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: Renewed SNonce - hexdump(len=32): df df 5b 9d 46 26 d7 ca 57 89
44 08 50 4c 9c 4f 9d a8 95 e8 33 37 76 55 c7 e6 9b b7 ee b2 4c b4
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=64): [REMOVED]
WPA: EAPOL-Key MIC - hexdump(len=16): 4a 6a c1 75 b3 8e 72 6c af 64 eb
eb ea 1a 2e 96
WPA: Sending EAPOL-Key 2/4
RX EAPOL from 00:12:00:d7:4f:20
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=121
  EAPOL-Key type=254
WPA: RX message 3 of 4-Way Handshake from 00:12:00:d7:4f:20 (ver=1)
WPA: IE KeyData - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02
01 00 00 50 f2 02 01 00 00 50 f2 02 28 00
WPA: Sending EAPOL-Key 4/4
WPA: Installing PTK to the driver.
WPA: RSC - hexdump(len=6): 00 00 00 00 00 00
wpa_driver_madwifi_set_key: alg=TKIP key_idx=0 set_tx=1 seq_len=6 key_len=32
RX EAPOL from 00:12:00:d7:4f:20
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=127
  EAPOL-Key type=254
WPA: RX message 1 of Group Key Handshake from 00:12:00:d7:4f:20 (ver=1)
WPA: Group Key - hexdump(len=32): [REMOVED]
WPA: Installing GTK to the driver (keyidx=1 tx=0).
WPA: RSC - hexdump(len=6): 3e 00 00 00 00 00
wpa_driver_madwifi_set_key: alg=TKIP key_idx=1 set_tx=0 seq_len=6 key_len=32
WPA: Sending EAPOL-Key 2/2
WPA: Key negotiation completed with 00:12:00:d7:4f:20 [PTK=TKIP GTK=TKIP]
Cancelling authentication timeout
EAPOL: External notification - portValid=1
EAPOL: External notification - EAP success=1
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state SUCCESS
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL: SUPP_BE entering state IDLE
RX EAPOL from 00:12:00:d7:4f:20
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=127
  EAPOL-Key type=254
WPA: RX message 1 of Group Key Handshake from 00:12:00:d7:4f:20 (ver=1)
WPA: Group Key - hexdump(len=32): [REMOVED]
WPA: Installing GTK to the driver (keyidx=1 tx=0).
WPA: RSC - hexdump(len=6): 3e 00 00 00 00 00
wpa_driver_madwifi_set_key: alg=TKIP key_idx=1 set_tx=0 seq_len=6 key_len=32
WPA: Sending EAPOL-Key 2/2
WPA: Group rekeying completed with 00:12:00:d7:4f:20 [GTK=TKIP]
RX EAPOL from 00:12:00:d7:4f:20
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=127
  EAPOL-Key type=254
WPA: RX message 1 of Group Key Handshake from 00:12:00:d7:4f:20 (ver=1)
WPA: Group Key - hexdump(len=32): [REMOVED]
WPA: Installing GTK to the driver (keyidx=1 tx=0).
WPA: RSC - hexdump(len=6): 3e 00 00 00 00 00
wpa_driver_madwifi_set_key: alg=TKIP key_idx=1 set_tx=0 seq_len=6 key_len=32
WPA: Sending EAPOL-Key 2/2
WPA: Group rekeying completed with 00:12:00:d7:4f:20 [GTK=TKIP]
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
Setting scan request: 0 sec 100000 usec
Added BSSID 00:12:00:d7:4f:20 into blacklist
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Disconnect event - remove keys
------------------------------------------------------------------------------

Regards,
YJ.



More information about the HostAP mailing list