problem with madwifi drivers

Fri Nov 26 07:58:11 EST 2004

Hi YenJung!!

These are tehe results

dhcppc0:~ # cd /home/oscar/madwifi/madwifi-20041021/net80211/
dhcppc0:/home/oscar/madwifi/madwifi-20041021/net80211 # cd ..
dhcppc0:/home/oscar/madwifi/madwifi-20041021 # insmod net80211/wlan.o
insmod: error inserting 'net80211/wlan.o': -1 File exists
dhcppc0:/home/oscar/madwifi/madwifi-20041021 # insmod net80211/wlan_acl.o
insmod: error inserting 'net80211/wlan_acl.o': -1 Unknown symbol in module
dhcppc0:/home/oscar/madwifi/madwifi-20041021 # insmod net80211/wlan_wep.o
insmod: error inserting 'net80211/wlan_wep.o': -1 Unknown symbol in module
dhcppc0:/home/oscar/madwifi/madwifi-20041021 # insmod net80211/wlan_tkip.o
insmod: error inserting 'net80211/wlan_tkip.o': -1 Unknown symbol in module
dhcppc0:/home/oscar/madwifi/madwifi-20041021 # insmod net80211/wlan_ccmp.o
insmod: error inserting 'net80211/wlan_ccmp.o': -1 Unknown symbol in module
dhcppc0:/home/oscar/madwifi/madwifi-20041021 # insmod ath_hal/ath_hal.o
insmod: error inserting 'ath_hal/ath_hal.o': -1 File exists
dhcppc0:/home/oscar/madwifi/madwifi-20041021 # insmod ath/ath_pci.o
insmod: error inserting 'ath/ath_pci.o': -1 File exists
dhcppc0:/home/oscar/madwifi/madwifi-20041021 #

some of them seem to be already included while some others not (don't know 
why). I can send you the log from madwifi installation if you think it can 
help...

Oscar

>From: YenJung Chang <yenjung at gmail.com>
>Reply-To: YenJung Chang <yenjung at gmail.com>
>To: Oscar p <reeopp at hotmail.com>
>CC: hostap at shmoo.com
>Subject: Re: problem with madwifi drivers
>Date: Fri, 26 Nov 2004 20:51:57 +0800
>
>OK...
>This my steps to insert madwifi modules, maybe you can give it a try
>and then tell us what you get.
>
>cd ${madwifi}
>insmod net80211/wlan.o
>insmod net80211/wlan_acl.o
>insmod net80211/wlan_wep.o
>insmod net80211/wlan_tkip.o
>insmod net80211/wlan_ccmp.o
>insmod ath_hal/ath_hal.o
>insmod ath/ath_pci.o
>
>yj.
>
>On Fri, 26 Nov 2004 13:33:17 +0100, Oscar p <reeopp at hotmail.com> wrote:
> > Hi YenJung
> > This is what I get:
> > dhcppc0:/ # insmod 
>/home/oscar/madwifi/madwifi-20041021/net80211/wlan_tkip.o
> > insmod: error inserting
> > '/home/oscar/madwifi/madwifi-20041021/net80211/wlan_tkip.o': -1 Unknown
> > symbol in module
> >
> > Thanks once more!!!!
> > Oscar
> >
> > >From: YenJung Chang <yenjung at gmail.com>
> > >Reply-To: YenJung Chang <yenjung at gmail.com>
> > >To: Oscar p <reeopp at hotmail.com>
> > >CC: hostap at shmoo.com
> > >Subject: Re: problem with madwifi drivers
> > >Date: Fri, 26 Nov 2004 20:29:02 +0800
> >
> >
> > >
> > >If you compiled madwifi as kernel module, the modules with prefixed
> > >"wlan_" were in
> > >directory "madwifi/net80211".  You can command as:
> > >
> > >insmod ${madwifi}/net80211/wlan_tkip.o
> > >
> > >please replace the ${madwifi} with the actual path of madwifi in your
> > >machine.
> > >
> > >
> > >If you compiled madwifi within kernel image, there is no madwifi
> > >modules needed to insert.
> > >
> > >yj.
> > >
> > >On Fri, 26 Nov 2004 12:32:27 +0100, Oscar p <reeopp at hotmail.com> wrote:
> > > >
> > > > Hi YenJung
> > > >
> > > > Sorry but where shall I insert them?
> > > >
> > > > BR/ Oscar
> > > >
> > > > >From: YenJung Chang <yenjung at gmail.com>
> > > > >Reply-To: YenJung Chang <yenjung at gmail.com>
> > > > >To: pepe perez <reeopp at hotmail.com>
> > > > >CC: hostap at shmoo.com
> > > > >Subject: Re: problem with madwifi drivers
> > > > >Date: Fri, 26 Nov 2004 17:12:44 +0800
> > > >
> > > >
> > > > >
> > > > >OK....
> > > > >I guess you just inserted wlan.o, ath_hal.o and ath_pci.o modules,
> > >right?
> > > > >
> > > > >Please also insert wlan_wep.o wlan_tkip.o and wlan_ccmp.o, those 
>are
> > > > >all in net80211 directory.
> > > > >
> > > > >yj.
> > > > >
> > > > >
> > > > >On Thu, 25 Nov 2004 15:21:46 +0100, pepe perez <reeopp at hotmail.com>
> > >wrote:
> > > > > > Hi YenJung!
> > > > > > I think I already tried it, anyway I have just tried again and 
>not
> > >so
> > > > >much
> > > > > > difference:
> > > > > >
> > > > > > dhcppc0:~ # wpa_supplicant -iath0 -c/etc/wpa_supplicant.conf -d
> > > > > > Configuration file '/etc/wpa_supplicant.conf' ->
> > > > >'/etc/wpa_supplicant.conf'
> > > > > > Reading configuration file '/etc/wpa_supplicant.conf'
> > > > > > ctrl_interface='/var/run/wpa_supplicant'
> > > > > > ctrl_interface_group=0
> > > > > > eapol_version=1
> > > > > > ap_scan=1
> > > > > > Priority group 1
> > > > > >    id=0 ssid='OSCARLAN'
> > > > > > Using existing control interface directory.
> > > > > > EAPOL: SUPP_PAE entering state DISCONNECTED
> > > > > > EAPOL: KEY_RX entering state NO_KEY_RECEIVE
> > > > > > EAPOL: SUPP_BE entering state INITIALIZE
> > > > > > EAP: EAP entering state DISABLED
> > > > > > EAPOL: External notification - portEnabled=0
> > > > > > EAPOL: External notification - portValid=0
> > > > > > wpa_driver_madwifi_set_wpa: enabled=1
> > > > > > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > > > > > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > > > > > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > > > > > Failed to enable WPA in the driver.
> > > > > > wpa_driver_madwifi_set_wpa: enabled=0
> > > > > > ioctl[IEEE80211_IOCTL_SETOPTIE]: Operation not supported
> > > > > > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > > > > > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > > > > > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > > > > > Failed to disable WPA in the driver.
> > > > > > wpa_driver_madwifi_set_drop_unencrypted: enabled=0
> > > > > > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > > > > > wpa_driver_madwifi_set_countermeasures: enabled=0
> > > > > > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > > > > > Control interface directory not empty - leaving it behind
> > > > > >
> > > > > > It looks like something else is going on, meybe in configuration 
>or
> > > > > > compilation....
> > > > > >
> > > > > > Thanks a lot for your help!!!
> > > > > > Oscar
> > > > > >
> > > > > > >From: YenJung Chang <yenjung at gmail.com>
> > > > > > >Reply-To: YenJung Chang <yenjung at gmail.com>
> > > > > > >To: pepe perez <reeopp at hotmail.com>
> > > > > > >CC: hostap at shmoo.com
> > > > > > >Subject: Re: problem with madwifi drivers
> > > > > > >Date: Thu, 25 Nov 2004 21:20:22 +0800
> > > > > > >
> > > > > > >AFAIK, the interface name of madwifi is "ath0", hence, the
> > >interface
> > > > > > >in your command should be -iath0, not -iwlan0.
> > > > > > >
> > > > > > >yj.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > > 
>_________________________________________________________________
> > > > > > Don't just search. Find. Check out the new MSN Search!
> > > > > > http://search.msn.click-url.com/go/onm00200636ave/direct/01/
> > > > > >
> > > > > >
> > > >
> > > > _________________________________________________________________
> > > > Express yourself instantly with MSN Messenger! Download today it's 
>FREE!
> > > > http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
> > > >
> > > >
> >
> > _________________________________________________________________
> > Don't just search. Find. Check out the new MSN Search!
> > http://search.msn.com/
> >
> >

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/