problem with madwifi drivers

YenJung Chang yenjung at gmail.com
Fri Nov 26 04:12:44 EST 2004


OK....
I guess you just inserted wlan.o, ath_hal.o and ath_pci.o modules, right?

Please also insert wlan_wep.o wlan_tkip.o and wlan_ccmp.o, those are
all in net80211 directory.

yj.


On Thu, 25 Nov 2004 15:21:46 +0100, pepe perez <reeopp at hotmail.com> wrote:
> Hi YenJung!
> I think I already tried it, anyway I have just tried again and not so much
> difference:
> 
> dhcppc0:~ # wpa_supplicant -iath0 -c/etc/wpa_supplicant.conf -d
> Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
> Reading configuration file '/etc/wpa_supplicant.conf'
> ctrl_interface='/var/run/wpa_supplicant'
> ctrl_interface_group=0
> eapol_version=1
> ap_scan=1
> Priority group 1
>    id=0 ssid='OSCARLAN'
> Using existing control interface directory.
> EAPOL: SUPP_PAE entering state DISCONNECTED
> EAPOL: KEY_RX entering state NO_KEY_RECEIVE
> EAPOL: SUPP_BE entering state INITIALIZE
> EAP: EAP entering state DISABLED
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> wpa_driver_madwifi_set_wpa: enabled=1
> ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> Failed to enable WPA in the driver.
> wpa_driver_madwifi_set_wpa: enabled=0
> ioctl[IEEE80211_IOCTL_SETOPTIE]: Operation not supported
> ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> Failed to disable WPA in the driver.
> wpa_driver_madwifi_set_drop_unencrypted: enabled=0
> ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> wpa_driver_madwifi_set_countermeasures: enabled=0
> ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> Control interface directory not empty - leaving it behind
> 
> It looks like something else is going on, meybe in configuration or
> compilation....
> 
> Thanks a lot for your help!!!
> Oscar
> 
> >From: YenJung Chang <yenjung at gmail.com>
> >Reply-To: YenJung Chang <yenjung at gmail.com>
> >To: pepe perez <reeopp at hotmail.com>
> >CC: hostap at shmoo.com
> >Subject: Re: problem with madwifi drivers
> >Date: Thu, 25 Nov 2004 21:20:22 +0800
> >
> >AFAIK, the interface name of madwifi is "ath0", hence, the interface
> >in your command should be -iath0, not -iwlan0.
> >
> >yj.
> >
> >
> >
> 
> _________________________________________________________________
> Don't just search. Find. Check out the new MSN Search!
> http://search.msn.click-url.com/go/onm00200636ave/direct/01/
> 
>



More information about the HostAP mailing list