Senao pcmcia - problem initializing

Pieter Smit hostaplist at ocsic.za.com
Fri May 21 12:03:47 EDT 2004


Hi,
My Senao pcmcia card stopped working after i reloaded my laptop.  It  
still
works under windows.

I get the following in the syslog when i insert the card.
I have tried the hostap source in Debian sid, and downloaded drivers  
from
http://hostap.epitest.fi/

Any suggestions as to what I could try next would be appreciated.

Regards,
Pieter Smit

May 20 11:01:01 laptop kernel: cs: memory probe 0xa0000000-0xa0ffffff:  
clean.
May 20 11:01:02 laptop cardmgr[2735]: socket 0: Senao SL-2011CD/SL- 
2011CDPLUS
May 20 11:01:02 laptop cardmgr[2735]: executing: 'modprobe hostap'
May 20 11:01:02 laptop kernel: hostap_crypt: registered algorithm  
'NULL'
May 20 11:01:02 laptop cardmgr[2735]: executing: 'modprobe hostap_cs'
May 20 11:01:02 laptop kernel: hostap_cs: 0.1.3 - 2004-02-08 (Jouni  
Malinen
<jkmaline at cc.hut.fi>)
May 20 11:01:02 laptop kernel: hostap_cs: setting Vcc=33 (constant)
May 20 11:01:02 laptop kernel: hostap_cs: CS_EVENT_CARD_INSERTION
May 20 11:01:02 laptop kernel: hostap_cs: setting Vcc=33 (from config)
May 20 11:01:02 laptop kernel: Checking CFTABLE_ENTRY 0x01 (default  
0x01)
May 20 11:01:02 laptop kernel: IO window settings: cfg->io.nwin=1 dflt. 
io.
nwin=1
May 20 11:01:02 laptop kernel: io->flags = 0x0046, io.base=0x0000,  
len=64
May 20 11:01:02 laptop kernel: hostap_cs: index 0x01: Vcc 3.3, irq 3,  
io
0x0100-0x013f
May 20 11:01:02 laptop kernel: hostap_cs: Registered netdevice wlan0
May 20 11:01:02 laptop ifplugd.hotplug[4307]: Invoking ifplugd for  
wlan0
May 20 11:01:02 laptop kernel: prism2_hw_init: initialized in 194 ms
May 20 11:01:02 laptop kernel: wlan0: trying to read PDA from  
0x007f0000: OK
May 20 11:01:02 laptop ifplugd(wlan0)[4317]: ifplugd 0.25 initializing.
May 20 11:01:04 laptop cardmgr[2735]: executing: './network start  
wlan0'
May 20 11:01:04 laptop kernel: wlan0: hfa384x_cmd: entry still in list?
(entry=c0e6cd44, type=0, res=0)
May 20 11:01:04 laptop kernel: wlan0: hfa384x_cmd: command was not  
completed
(res=0, entry=c0e6cd44, typ e=0, cmd=0x0021, param0=0xfd0b, EVSTAT=8010
INTEN=0010)
May 20 11:01:04 laptop kernel: wlan0: interrupt delivery does not seem  
to work
May 20 11:01:04 laptop kernel: wlan0: hfa384x_get_rid: CMDCODE_ACCESS  
failed
(res=-110, rid=fd0b, len=8)
May 20 11:01:04 laptop kernel: Could not get RID for component NIC
May 20 11:01:04 laptop kernel: hostap_cs: Initialization failed
May 20 11:01:04 laptop ifplugd(wlan0)[4317]: Using interface
wlan0/00:00:00:00:00:00
May 20 11:01:04 laptop ifplugd(wlan0)[4317]: Using detection mode:  
IFF_RUNNING
May 20 11:01:04 laptop ifplugd(wlan0)[4317]: Initialization complete,  
link
beat not detected.
May 20 11:01:04 laptop kernel: wlan0: hfa384x_cmd: entry still in list?
(entry=c0e6cbc4, type=0, res=0)
May 20 11:01:04 laptop kernel: wlan0: hfa384x_cmd: command was not  
completed
(res=0, entry=c0e6cbc4, typ e=0, cmd=0x0001, param0=0x0000, EVSTAT=8000
INTEN=0000)
May 20 11:01:04 laptop kernel: wlan0: MAC port 0 enabling failed
May 20 11:01:04 laptop kernel: wlan0: could not enable MAC port
May 20 11:01:05 laptop cardmgr[2735]: + Ignoring unknown interface
wlan0=wlan0.
May 20 11:01:05 laptop net.agent[4328]: Setting up IP spoofing  
protection:
rp_filter.
May 20 11:01:05 laptop net.agent[4348]: Setting up IP spoofing  
protection:
rp_filter.

... and
laptop:~# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

sit0      no wireless extensions.

wlan0     no wireless extensions.

laptop:~# cardctl ident
Socket 0:
  product info: "INTERSIL", "HFA384x/IEEE", "Version 01.02", ""
  manfid: 0x0156, 0x0002
  function: 6 (network)




More information about the HostAP mailing list