update sta fw to 1.8.3 failed

Sergey Basmanov sergey at billing.idknet.com
Tue May 25 05:44:42 EDT 2004

What does it means:

#prism2_srec -v wlan0 rf010803.hex

S3 CRC-16 generation record: start=0x007E1800 len=65536 prog=1
Start address 0x003f0c01
srec summary for rf010803.hex
Component: 0x001f 1.8.3 (station firmware)
Supported platforms:
  0x800a 1.0.0,  0x800b 1.0.0,  0x800c 1.0.0,  0x800d 1.0.0,  0x8012 1.0.0
  0x8013 1.0.0,  0x8014 1.0.0,  0x8016 1.0.0,  0x8017 1.0.0,  0x8018 1.0.0
  0x801a 1.0.0,  0x801b 1.0.0,  0x801c 1.0.0,  0x8021 1.0.0,  0x8022 1.0.0
  0x8023 1.0.0,  0x800a 1.0.0,  0x800e 1.0.0,  0x8015 1.0.0,  0x8019 1.0.0
  0x801d 1.0.0,  0x8024 1.0.0
Interface compatibility information:
  role=Supplier variant=3 range=1-15 iface=Station Firmware-Driver (4)
  role=Actor    variant=1 range=1-1 iface=Modem-Firmware (1)
  role=Actor    variant=2 range=1-1 iface=Controller-Firmware (2)
  role=Actor    variant=1 range=4-4 iface=Primary Firmware-Driver (3)
Separate S3 data areas:
S3 area count: 3
  addr=0x007E1800..0x007EEAA1 (len=53922)
  addr=0x007F0800..0x007F17FF (len=4096)
  addr=0x007FE000..0x007FECD1 (len=3282)
Total data length: 61300
Start address 0x003f0c01

Wireless LAN card information:
  NICID: 0x8013 v1.0.0
  PRIID: 0x0015 v1.1.1
  STAID: 0x001f v1.7.4
Interface compatibility information:
  PRI role=Supplier variant=1 range=1-1 iface=Modem-Firmware (1)
  PRI role=Supplier variant=2 range=1-1 iface=Controller-Firmware (2)
  PRI role=Supplier variant=1 range=4-4 iface=Primary Firmware-Driver (3)
  STA role=Supplier variant=1 range=1-12 iface=Station Firmware-Driver (4)
  PRI role=Actor    variant=2 range=1-1 iface=Controller-Firmware (2)
  STA role=Actor    variant=2 range=1-1 iface=Controller-Firmware (2)
  STA role=Actor    variant=1 range=1-1 iface=Modem-Firmware (1)

Verifying update compatibility and combining data:
Plugging PDR 0xffffffff at 0x007ee5c6 (len=14)
Plugging PDR 0x0202 at 0x007f1250 (len=100)
Plugging PDR 0x0203 at 0x007f12b4 (len=128)
Plugging PDR 0x0204 at 0x007f1434 (len=80)
Plugging PDR 0x0405 at 0x007f1484 (len=4)
PDR 0x0405 not found from wlan card PDA. Using default data.
  len=4: 00 00 00 30
Plugging PDR 0x0300 at 0x007f1488 (len=28)
Plugging PDR 0x0301 at 0x007f14a4 (len=34)
Plugging PDR 0x0101 at 0x007f16b0 (len=6)
Plugging PDR 0x0103 at 0x007ee588 (len=12)
Plugging PDR 0x0104 at 0x007ee6c0 (len=2)
Plugging PDR 0x0105 at 0x007f16bc (len=2)
Plugging PDR 0x0105 at 0x007ee6f6 (len=2)
Plugging PDR 0x0105 at 0x007f17bc (len=2)
Plugging PDR 0x0107 at 0x007ee596 (len=2)
Plugging PDR 0x0006 at 0x007ee562 (len=10)
Plugging PDR 0x0406 at 0x007f1750 (len=2)
PDR 0x0406 not found from wlan card PDA. Using default data.
  len=2: 64 00
Plugging PDR 0x0302 at 0x007f14cc (len=2)
PDR 0x0302 not found from wlan card PDA. Using default data.
  len=2: 12 00
Plugging PDR 0x0303 at 0x007f14ce (len=2)
PDR 0x0303 not found from wlan card PDA. Using default data.
  len=2: ff 1f
Plugging PDR 0x0412 at 0x007ee716 (len=6)
PDR 0x0412 not found from wlan card PDA. Using default data.
  len=6: 03 00 02 00 02 00
Plugging PDR 0x0413 at 0x0000118a (len=2)
Could not find data position for plugging PDR 0x0413 at 0x0000118a (len=2)
Incompatible update data.

Something wrong with my card or it's just incompatible firmware?


More information about the HostAP mailing list