Problems connecting to AP after reinstalling linux and driver

henrikg at fys.ku.dk henrikg at fys.ku.dk
Mon Mar 22 13:27:06 EST 2004



> hi
> 
> is your ap in the scan results? (wrong essid? try 'any') 
Yes it is the scan result, essid is correct.

> can you connect with another driver? (orinoco)
Yes that works - but i need the manual roaming in the hostap driver

> did you try to start the device manually? (what does the suse-script do
> with your settings?)
Yes i tried a /etc/init.d/pcmcia restart - same result

> what causes the "wlan0 unsupported ioctl(0x89f1)"? (which command
> fails?)
I don't remember, but I read in another thread that this safely can be 
ignored

> checked the ap settings?
They are the same as befor the reinstallation...

> tried another irq?
No, I try this as soon as I'm back at my Linux machine. I don't think this 
is the problem, since the card (by magic?!) connected to one of the AP 
yesterday - but never since.

What about the wifi device? Could some plz explain this to me? Why does it 
exist?

Regards
Henrik 
> 
> regards,
> peter
> 
> 
> On Mon, 22 Mar 2004 10:57:21 +0100
> Henrik Gütle <henrikg at fys.ku.dk> wrote:
> 
> > After a lot of work I'm still unable to log on to any AP. Last time -
> > before 
> > reinstalling - I used hostap-diver-0.2.0 and I am pretty sure that the
> > "wifi 
> > device" didn't existed - just as it is the case for the 0.1.3 version.
> > So I 
> > thought that the 0.2.0 tarball has been modified since then. After
> > downloading older "0.2.0 branch" files, I still have this wifi device.
> > So it seems that this allways has been a part of the 0.2 branch, and
> > so this can't be the problem. 
> > Maybe my configuration file is wrong (see below). I don't use a key,
> > but this worked fine the last time (the APs aren't connected to the
> > network). 
> > Does someone have an idea, I'm running out of options...
> > 
> > \Henrik 
> > 
> > ifcfg-wlan0:
> > BOOTPROTO='dhcp'
> > DHCLIENT_SET_DOWN_LINK='yes'
> > MTU=''
> > REMOTE_IPADDR=''
> > STARTMODE='hotplug'
> > UNIQUE='K1pk.jrBDbmL7DWA'
> > WIRELESS_ESSID='Wireless DIKU'
> > WIRELESS_KEY=''
> > WIRELESS_MODE='Managed'
> > WIRELESS_NICK='Henrik'
> > WIRELESS_NWID=''
> > DHCLIENT_MODIFY_RESOLV_CONF='yes'
> > DHCLIENT_SET_DEFAULT_ROUTE='yes'
> > 
> > iwconfig:
> > wlan0     IEEE 802.11b  ESSID:"Wireless DIKU"  Nickname:"Henrik"
> >           Mode:Managed  Frequency:2.467GHz  Access Point:
> > 44:44:44:44:44:44  
> >           Bit Rate:2Mb/s   Sensitivity=1/3  
> >           Retry min limit:8   RTS thr:off   Fragment thr:off
> >           Encryption key:off
> >           Power Management:off
> >           Link Quality:0/92  Signal level:-69 dBm  Noise level:-90 dBm
> >           Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
> >           Tx excessive retries:0  Invalid misc:54   Missed beacon:0
> > 
> > henrikg at fys.ku.dk said:
> > 
> > > After reinstalling my Suse 9.0 distribution, my Linksys WPC11
> > (firmware 
> > > 1.7.4) with hostap-driver 0.2.0 can't connect to any AP. The driver
> > > is
> > 
> > > loaded (se dmesg below), and iwconfig shows wlan0 and wifi. What is
> > wifi? 
> > > Befor reinstalling linux this interface wasn't there. Furthermore I
> > can't 
> > > find any configuration files for wifi, so how can it be "created"?
> > > But
> > maybe 
> > > this has nothing to do with my problem. I also tried hostap-driver
> > 0.1.3 - 
> > > same result. Trying to change the AP manually didn't help.
> > > 
> > > \Henrik
> > > -------
> > > ifcfg-wlan0:
> > > BOOTPROTO='dhcp'
> > > DHCLIENT_SET_DOWN_LINK='yes'
> > > MTU=''
> > > REMOTE_IPADDR=''
> > > STARTMODE='hotplug'
> > > UNIQUE='K1pk.jrBDbmL7DWA'
> > > WIRELESS_ESSID='Wireless DIKU'
> > > WIRELESS_KEY=''
> > > WIRELESS_MODE='Managed'
> > > WIRELESS_NICK='Henrik'
> > > WIRELESS_NWID=''
> > > DHCLIENT_MODIFY_RESOLV_CONF='yes'
> > > DHCLIENT_SET_DEFAULT_ROUTE='yes'
> > > 
> > > -------
> > > dmesg:
> > > cs: memory probe 0xa0000000-0xa0ffffff: clean.
> > > hostap_crypt: registered algorithm 'NULL'
> > > hostap_cs: 0.2.0 - 2004-02-15 (Jouni Malinen <jkmaline at cc.hut.fi>)
> > > hostap_cs: setting Vcc=33 (constant)
> > > hostap_cs: CS_EVENT_CARD_INSERTION
> > > hostap_cs: setting Vcc=50 (from config)
> > > Checking CFTABLE_ENTRY 0x01 (default 0x01)
> > > IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
> > > io->flags = 0x0046, io.base=0x0000, len=64
> > > hostap_cs: Registered netdevice wifi0
> > > hostap_cs: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
> > > prism2_hw_init: initialized in 194 ms
> > > wifi0: NIC: id=0x801b v1.0.0
> > > wifi0: PRI: id=0x15 v1.1.1
> > > wifi0: STA: id=0x1f v1.7.4
> > > wifi0: registered netdevice wlan0
> > > wlan0 unsupported ioctl(0x89f1)
> > > prism2: wlan0: operating mode changed 3 -> 2
> > > wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c
> > >    retry_count=0 tx_rate=0 fc=0x0108 (Data::0 ToDS)
> > >    A1=00:00:00:00:00:00 A2=00:06:25:16:c3:73 A3=ff:ff:ff:ff:ff:ff
 
> > > A4=00:00:00:
> > > 00:00:00
> > > -----------
> > > 
> > > 
> > > 
> > > _______________________________________________
> > > HostAP mailing list
> > > HostAP at shmoo.com
> > > http://lists.shmoo.com/mailman/listinfo/hostap
> > > 
> > 
> > 
> > 
> > -- 
> > 
> > 
> > 
> > 
> > _______________________________________________
> > HostAP mailing list
> > HostAP at shmoo.com
> > http://lists.shmoo.com/mailman/listinfo/hostap
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
> 



-- 







More information about the HostAP mailing list