Failed to initialize EAPOL state machines

[Nicolas]

On Tue, Jun 01, 2004 at 02:52:25PM -0500, Hafeez wrote:
> Get the latest version wpa_supplicant 0.2.2. 
> It is fixed.
> 
> -HR

I downloaded wpa_supplicant 0.2.2. I also downloaded and installed the
latest hostap modules and hostap-utils.
It still does not work. Here's the output:

wpa_supplicant -iwlan0 -dd -c/etc/wpa_supplicant.conf
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
eapol_version=1
Line: 115 - start of a new network block
SSID - hexdump_ascii(len=9):
     .. .. .. .. .. .. .. .. ..                        .........       
     proto: 0x3
     key_mgmt: 0x2
     pairwise: 0x10
     group: 0x10
     PSK - hexdump(len=32): .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
     .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
     wpa_driver_hostap_set_wpa: enabled=1
     ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
     Failed to enable WPA in the driver.

I use a Senao CD2511+EXT2 pcmcia card, which uses a prism chipset.