PCI: No IRQ known for interrupt pin A of device 02:07.0

Brian Sturgill zen_hacker at hotmail.com
Thu Jul 29 22:21:30 EDT 2004


Try switching pci slots with the card. Some machines assign irq's to the pci 
slots.

Brian


>From: "gaurav dawra" <openapproject at hotmail.com>
>To: hostap at shmoo.com
>Subject: PCI: No IRQ known for interrupt pin A of device 02:07.0
>Date: Thu, 29 Jul 2004 23:32:01 +0000
>
>Hi
>
>I am trying to confiure my 'cardbus'  PCI-->PCMCIA bridge(Ricoh Chipset). I 
>am trying it on Dell optiplex with bios A02.
>
>You can see that in "lspci".
>00:1f.2 IDE interface: Intel Corp.: Unknown device 24d1 (rev 02)
>00:1f.3 SMBus: Intel Corp. 82801EB SMBus (rev 02)
>00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio (rev 
>02)
>01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 
>AGP 8x] (rev a2)
>==>02:07.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80)<===
>02:0c.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet 
>Controller (rev 02)
>
>I am using Yenta_Socket and ds for it to load the bridge. But after 
>starting the "service pcmcia start" i
>
>lsmod gives me this :
>
>Module                  Size  Used by    Not tainted
>ds                      8840   1
>yenta_socket           12928   1
>pcmcia_core            54720   0  [ds yenta_socket]
>parport_pc             19108   1  (autoclean)
>
>[root at localhost isapnptools-1.26]# more /proc/interrupts
>           CPU0
>  0:     370938          XT-PIC  timer
>  1:       8846          XT-PIC  keyboard
>  2:          0          XT-PIC  cascade
>  8:          1          XT-PIC  rtc
>  9:      54108          XT-PIC  eth0
>12:      40376          XT-PIC  PS/2 Mouse
>14:      21410          XT-PIC  ide0
>15:         16          XT-PIC  ide1
>NMI:          0
>ERR:          0
>
>see dmesg and this is what i get.
>
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>parport0: irq 7 detected
>lp0: using parport0 (polling).
>lp0: console ready
>unloading Kernel Card Services
>Linux Kernel Card Services 3.1.22
>  options:  [pci] [cardbus] [pm]
>===>PCI: No IRQ known for interrupt pin A of device 02:07.0<====
>Yenta IRQ list 0000, PCI irq0
>Socket status: 30000006
>cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc7f
>cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x0a00-0x0aff: clean.
>====================================
>hmm......I tried and read many posting on the internet about the same 
>issue.  Also the posting from linus, pavel and many others. It seems to me 
>that linux is trying to find the irq for the ISA device and cud not find 
>any and then just gives up. It says that 'try pci=biosirq' or pci=noapci, i 
>tried that did lilo-v and rebooted the system still the same error stays :(
>
>Some posts mentioned to check the linux config file whether it is a pnp OS 
>or not.
>
>#
># Plug and Play configuration
>#
>CONFIG_PNP=y
>CONFIG_ISAPNP=y
>
>#
># Block devices
>#
>CONFIG_BLK_DEV_FD=y
>CONFIG_BLK_DEV_XD=m
>CONFIG_PARIDE=m
>CONFIG_PARIDE_PARPORT=m
>
>So above 'clip' from the CONFIG file suggests that it is a PnP OS. So it 
>should scans for all devices by itself and provide appropiate irq.
>
>According to this posting :
>http://david.dpitts.com/archives/000012.html
>
>It says that  ' we have to set pnp OS in bios as NO' , Well in my DELL bios 
>A02 there is no such entry, thanx to dell. So i cannot see whether BIOS is 
>configuring the devices or not.  Is this is a BIOS PROBLEM?
>
>
>I searched for many hours on the internet to find the solution of the 
>problem. And tried all things which i could find in those postings. Am i 
>heading towards the dead end in this case, somebody please guide me to the 
>right direction.
>
>Some clue will be quite helpful. I am also mentioning output of ''lspci 
>-vvx'" to look over.
>
>[root at localhost isapnptools-1.26]# lspci -vvx
>00:00.0 Host bridge: Intel Corp. 82865G [Springdale-G] Chipset Host Bridge 
>(rev 02)
>        Subsystem: Dell Computer Corporation: Unknown device 0151
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>Stepping- SERR+ FastB2B-        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- 
>DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>        Latency: 0
>        Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
>        Capabilities: [e4] #09 [0106]
>        Capabilities: [a0] AGP version 3.0
>                Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
>                Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none>
>00: 86 80 70 25 06 01 90 20 02 00 00 06 00 00 00 00
>10: 08 00 00 e8 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 51 01
>30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00
>
>00:01.0 PCI bridge: Intel Corp.: Unknown device 2571 (rev 02) (prog-if 00 
>[Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>Stepping- SERR+ FastB2B-        Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- 
>DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64
>        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>        Memory behind bridge: fd000000-feafffff
>        Prefetchable memory behind bridge: f0000000-f7ffffff
>        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
>00: 86 80 71 25 07 01 a0 00 02 00 04 06 00 40 01 00
>10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 a0 22
>20: 00 fd a0 fe 00 f0 f0 f7 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00
>
>00:1d.0 USB Controller: Intel Corp. 82801EB USB (Hub #1) (rev 02) (prog-if 
>00 [UHCI])
>        Subsystem: Dell Computer Corporation: Unknown device 0151
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>Stepping- SERR- FastB2B-        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- 
>DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin A routed to IRQ 11
>        Region 4: I/O ports at ff80 [size=32]
>00: 86 80 d2 24 05 00 80 02 02 00 03 0c 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 81 ff 00 00 00 00 00 00 00 00 00 00 28 10 51 01
>30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
>
>00:1d.1 USB Controller: Intel Corp. 82801EB USB (Hub #2) (rev 02) (prog-if 
>00 [UHCI])
>        Subsystem: Dell Computer Corporation: Unknown device 0151
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>Stepping- SERR- FastB2B-        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- 
>DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin B routed to IRQ 10
>        Region 4: I/O ports at ff60 [size=32]
>00: 86 80 d4 24 05 00 80 02 02 00 03 0c 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 61 ff 00 00 00 00 00 00 00 00 00 00 28 10 51 01
>30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
>
>00:1d.2 USB Controller: Intel Corp. 82801EB USB (Hub #3) (rev 02) (prog-if 
>00 [UHCI])
>        Subsystem: Dell Computer Corporation: Unknown device 0151
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>Stepping- SERR- FastB2B-        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- 
>DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin C routed to IRQ 9
>        Region 4: I/O ports at ff40 [size=32]
>00: 86 80 d7 24 05 00 80 02 02 00 03 0c 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 41 ff 00 00 00 00 00 00 00 00 00 00 28 10 51 01
>30: 00 00 00 00 00 00 00 00 00 00 00 00 09 03 00 00
>
>00:1d.3 USB Controller: Intel Corp. 82801EB USB EHCI Controller #2 (rev 02) 
>(prog-if 00 [UHCI])
>        Subsystem: Dell Computer Corporation: Unknown device 0151
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>Stepping- SERR- FastB2B-        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- 
>DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin A routed to IRQ 11
>        Region 4: I/O ports at ff20 [size=32]
>00: 86 80 de 24 05 00 80 02 02 00 03 0c 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 21 ff 00 00 00 00 00 00 00 00 00 00 28 10 51 01
>30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
>
>00:1d.7 USB Controller: Intel Corp. 82801EB USB EHCI Controller (rev 02) 
>(prog-if 20 [EHCI])
>        Subsystem: Dell Computer Corporation: Unknown device 0151
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>Stepping- SERR+ FastB2B-        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- 
>DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin D routed to IRQ 5
>        Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
>        Capabilities: [50] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
>PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [58] #0a [20a0]
>00: 86 80 dd 24 06 01 90 02 02 20 03 0c 00 00 00 00
>10: 00 08 a8 ff 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 51 01
>30: 00 00 00 00 50 00 00 00 00 00 00 00 05 04 00 00
>
>00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev c2) (prog-if 
>00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>Stepping- SERR+ FastB2B-        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- 
>DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
>        I/O behind bridge: 0000d000-0000dfff
>        Memory behind bridge: fcf00000-fcffffff
>        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>00: 86 80 4e 24 07 01 80 00 c2 00 04 06 00 00 01 00
>10: 00 00 00 00 00 00 00 00 00 02 02 20 d0 d0 80 22
>20: f0 fc f0 fc f0 ff 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00
>
>
>00:1f.0 ISA bridge: Intel Corp. 82801EB ISA Bridge (LPC) (rev 02)
>        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
>Stepping- SERR+ FastB2B-        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- 
>DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>00: 86 80 d0 24 0f 01 80 02 02 00 01 06 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:1f.1 IDE interface: Intel Corp. 82801EB ICH5 IDE (rev 02) (prog-if 8a 
>[Master SecP PriP])
>        Subsystem: Dell Computer Corporation: Unknown device 0151
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>Stepping- SERR- FastB2B-        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- 
>DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin A routed to IRQ 9
>        Region 0: I/O ports at 01f0 [size=8]
>        Region 1: I/O ports at 03f4
>        Region 2: I/O ports at 0170 [size=8]
>        Region 3: I/O ports at 0374
>        Region 4: I/O ports at ffa0 [size=16]
>        Region 5: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
>00: 86 80 db 24 07 00 88 02 02 8a 01 01 00 00 00 00
>10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00
>20: a1 ff 00 00 00 fc bf fe 00 00 00 00 28 10 51 01
>30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00
>
>00:1f.2 IDE interface: Intel Corp.: Unknown device 24d1 (rev 02) (prog-if 
>8f [Master SecP SecO PriP
>PriO])
>        Subsystem: Dell Computer Corporation: Unknown device 0151
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>Stepping- SERR- FastB2B-        Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- 
>DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin A routed to IRQ 9
>        Region 0: I/O ports at fe00 [size=8]
>        Region 1: I/O ports at fe10 [size=4]
>        Region 2: I/O ports at fe20 [size=8]
>        Region 3: I/O ports at fe30 [size=4]
>        Region 4: I/O ports at fea0 [size=16]
>00: 86 80 d1 24 05 00 a0 02 02 8f 01 01 00 00 00 00
>10: 01 fe 00 00 11 fe 00 00 21 fe 00 00 31 fe 00 00
>20: a1 fe 00 00 00 00 00 00 00 00 00 00 28 10 51 01
>30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00
>
>00:1f.3 SMBus: Intel Corp. 82801EB SMBus (rev 02)
>        Subsystem: Dell Computer Corporation: Unknown device 0151
>        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>Stepping- SERR- FastB2B-        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- 
>DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Interrupt: pin B routed to IRQ 3
>        Region 4: I/O ports at eda0 [size=32]
>00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: a1 ed 00 00 00 00 00 00 00 00 00 00 28 10 51 01
>30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00
>
>00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio (rev 
>02)
>        Subsystem: Dell Computer Corporation: Unknown device 0151
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>Stepping- SERR- FastB2B-        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- 
>DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin B routed to IRQ 3
>        Region 0: I/O ports at ee00 [size=256]
>        Region 1: I/O ports at edc0 [size=64]
>        Region 2: Memory at febffa00 (32-bit, non-prefetchable) [size=512]
>        Region 3: Memory at febff900 (32-bit, non-prefetchable) [size=256]
>        Capabilities: [50] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
>PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: 86 80 d5 24 07 00 90 02 02 00 01 04 00 00 00 00
>10: 01 ee 00 00 c1 ed 00 00 00 fa bf fe 00 f9 bf fe
>20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 51 01
>30: 00 00 00 00 50 00 00 00 00 00 00 00 03 02 00 00
>
>01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 
>AGP 8x] (rev a2) (prog-if 00 [VGA])
>        Subsystem: nVidia Corporation: Unknown device 0191
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>Stepping- SERR- FastB2B-        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- 
>DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64 (1250ns min, 250ns max)
>        Interrupt: pin A routed to IRQ 11
>        Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
>        Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
>        Expansion ROM at fea00000 [disabled] [size=128K]
>        Capabilities: [60] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
>PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [44] AGP version 3.0
>                Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
>                Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
>00: de 10 81 01 07 00 b0 02 a2 00 00 03 00 40 00 00
>10: 00 00 00 fd 08 00 00 f0 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 91 01
>30: 00 00 a0 fe 60 00 00 00 00 00 00 00 0b 01 05 01
>
>02:07.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80)
>        Subsystem: CARRY Computer ENG. CO Ltd: Unknown device 0101
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>Stepping- SERR- FastB2B-        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- 
>DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 168
>        Interrupt: pin A routed to IRQ 0
>        Region 0: Memory at 20000000 (32-bit, non-prefetchable) [size=4K]
>        Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
>        Memory window 0: 20400000-207ff000 (prefetchable)
>        Memory window 1: 20800000-20bff000
>        I/O window 0: 00004000-000040ff
>        I/O window 1: 00004400-000044ff
>        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- 
>PostWrite+
>        16-bit legacy interface ports at 0001
>00: 80 11 75 04 07 00 10 02 80 00 07 06 00 a8 02 00
>10: 00 00 00 20 dc 00 00 02 02 03 06 b0 00 00 40 20
>20: 00 f0 7f 20 00 00 80 20 00 f0 bf 20 00 40 00 00
>30: fc 40 00 00 00 44 00 00 fc 44 00 00 00 01 00 05
>40: ef 14 01 01 01 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>02:0c.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet 
>Controller (rev 02)
>        Subsystem: Dell Computer Corporation: Unknown device 0151
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
>Stepping- SERR+ FastB2B-        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- 
>DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64 (63750ns min), cache line size 10
>        Interrupt: pin A routed to IRQ 9
>        Region 0: Memory at fcfe0000 (32-bit, non-prefetchable) [size=128K]
>        Region 2: I/O ports at df40 [size=64]
>        Capabilities: [dc] Power Management version 2
>                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
>PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>        Capabilities: [e4] PCI-X non-bridge device.
>                Command: DPERE- ERO+ RBC=0 OST=0
>                Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, 
>DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-  Capabilities: [f0] Message 
>Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>                Address: 0000000000000000  Data: 0000
>00: 86 80 0e 10 17 01 30 02 02 00 00 02 10 40 00 00
>10: 00 00 fe fc 00 00 00 00 41 df 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 51 01
>30: 00 00 00 00 dc 00 00 00 00 00 00 00 09 01 ff 00
>
>
>I will really appreciate some clue , please point me the right direction.
>
>Well FYI , this is what i get when i *compile* the kernel which i working 
>on, and do "modules_install"
>
>mkdir -p pcmcia; \
>find kernel -path '*/pcmcia/*' -name '*.o' | xargs -i -r ln -sf ../{} 
>pcmcia
>if [ -r System.map ]; then /sbin/depmod -ae -F System.map  2.4.20rn; fi
>depmod: *** Unresolved symbols in /lib/modules/2.4.20rn/pcmcia/tcic.o
>depmod:         pci_irq_mask
>[root at localhost linux-2.4.20]#
>===============================
>
>Well i believe it won't be that significant, i am curious if it is.
>
>Meanwhile, Also i download the 'isapnptools-2.6" and tried to configure 
>which configure the Plug and Play devices, i am still working on it to see 
>how to works!
>
>
>Looking for some quick response,
>
>Thanx--Gaurav
>
>Thanx
>
>_________________________________________________________________
>Discover the best of the best at MSN Luxury Living. http://lexus.msn.com/
>
>_______________________________________________
>HostAP mailing list
>HostAP at shmoo.com
>http://lists.shmoo.com/mailman/listinfo/hostap

_________________________________________________________________
Planning a family vacation? Check out the MSN Family Travel guide! 
http://dollar.msn.com




More information about the HostAP mailing list