AW: hostAP with embedded Prism2 card

Karl Rothenhofer Karl.Rothenhoefer at t-online.de
Mon Jul 26 15:02:43 EDT 2004


I had the same issue recently, and after failing I did some theoretical
investigations using a couple of sources. Result: hostap doesn't work for
Prism2 over USB, and to my knowledge there is no intent to make it ever
work.

So if you are just interested in a Linux driver for mode managed or ad-hoc,
use prism2_usb, a driver, that may be embedded in your Linux distribution.

If you are interested in making an Accesspoint with that wlan-interface,
then things ar not completely impossible but seem to be such difficult to
me, that I did not try.

Regards
Karl




> -----Ursprungliche Nachricht-----
> Von: hostap-bounces+karl.rothenhoefer=t-online.de at shmoo.com
> [mailto:hostap-bounces+karl.rothenhoefer=t-online.de at shmoo.com]Im
> Auftrag von Andrea G. Forte
> Gesendet: Montag, 26. Juli 2004 20:25
> An: hostap at shmoo.com
> Betreff: hostAP with embedded Prism2 card
>
>
> Hello all.
>
> I wanted to test the hostAP on a Zaurus 6000 Pda. On this pda
> there is an
> embedded Prism2 wireless card. For the normal driver to be loaded, the
> card manager uses the p80211.o module which registers to the usb
> controller.
> Does hostAP support this embedded kind of Prism2 card?
>
> Thank you all,
> Andrea
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap




More information about the HostAP mailing list