IRQ'S Bugging me!! Help!!
openapproject at hotmail.com
Fri Jul 23 19:45:43 EDT 2004
:) Thanx Denis , i have seen the fireworks, well these IRQ's are bugging me
now :(. It's still NOT working. well i ran test.sh script and after starting
the "pcmcia" services it does not respond back, it does not collect any
errors . It seems like HardDisk is not responding back. So all i can do at
that point is take the power off and plug it back to restart the machine.
Kernel just stops working on me.
If you have clue how the IRQ's are assigned by the linux kernel.
0: 69250 XT-PIC timer
1: 2184 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
11: 8936 XT-PIC eth0, i82365
12: 6630 XT-PIC PS/2 Mouse
14: 9157 XT-PIC ide0
15: 20834 XT-PIC ide1
I have excluded all these above IRQ's in the 'config.opts" file. But Still
Does not work.
Can i assign a static irq's to the hostap_cs driver. By modifying the
"config.opts" file. I don't really know what to do, it is kind of frustating
FYI the bridge loads succesfully and but the card is giving the problem. I
can successfuly load the "orinoco" drivers but not the hostap_cs one ?? why
If anyone out there have any clue please suggest.
>From: Denis Vlasenko <vda at port.imtp.ilyichevsk.odessa.ua>
>To: "gaurav dawra" <openapproject at hotmail.com>
>Subject: Re: IRQ interrupt problem& HOSTAP
>Date: Fri, 23 Jul 2004 00:16:49 +0300
>On Thursday 22 July 2004 19:16, gaurav dawra wrote:
> > Thanx denis.
> > For loading Hostap i just need to start the cardmgr byu
> > start"
> > What should i do after this, as the keyboard hangs and i could not able
> > do anything.
>You should create a shell script:
>echo "Going to start PCMCIA"
>echo "I will collect some data now. Reboot and examine /tmp contents"
>cat /proc/interrupts >/tmp/ints
>echo "Ok you may reboot me now."
>shutdown -r now
>Just run it:
># sh test.sh
>and watch the fireworks :)
FREE pop-up blocking with the new MSN Toolbar get it now!
More information about the HostAP