WPA error message

Ian McDonald imcdnzl at gmail.com
Fri Dec 31 18:38:01 EST 2004


Mine was doing a very similar thing and I found that it was as simple
as typing in "ifconfig wlan0 up" before starting wpa_supplicant -
mainly because I didn't understand all the parts. Maybe you have done
this but this was the mistake I made when I started and it gave the
authentaticantion wiht 00:00..... on my output.....


On Fri, 31 Dec 2004 16:10:00 +0100, Shawn Adams <shawn_adams at web.de> wrote:
> I'm wondering about the following, using Suse 9.2 kernel 2.6.8-24-default.
> 
> wpa_supplicant-0.2.4-5
> ndiswrapper-0.10-3
> 
> the card is a Dell internal using ndiswrapper, whcih works fine using
> WEP 104, but trying to set for WPA:
> 
> ctrl_interface=/var/run/wpa_supplicant
> ctrl_interface_group=wheel
> ap_scan=1
> eapol_version=1
> network={
>          ssid="private_wlan"
>          proto=WPA
>          scan_ssid=0
>          key_mgmt=WPA-PSK
>          group=CCMP TKIP WEP104 WEP40
>          psk="nomicroslop"
>          pairwise= CCMP TKIP
> }
> 
>  >> wpa_supplicant -d -d -i wlan0 -c /etc/wpa_supplicant.conf -D
> ndiswrapper
> 
> debug outout:
> 
> 1: 00:20:d8:03:8a:bc ssid='private_wlan' wpa_ie_len=26 rsn_ie_len=0
>     selected
> Trying to associate with 00:20:d8:03:8a:bc (SSID='private_wlan'
> freq=5200 MHz)
> Cancelling scan request
> WPA: using IEEE 802.11i/D3.0
> WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 05
> 01 00 00 50 f2 02 01 00 00 50 f2 02
> Setting authentication timeout: 5 sec 0 usec
> EAPOL: External notification - EAP success=0
> EAPOL: External notification - EAP fail=0
> EAPOL: External notification - portControl=Auto
> EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
> EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
> EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
> EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
> EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
> Authentication with 00:00:00:00:00:00 timed out.
> 
> So it looks like it correctly identified the AP, selects it, but then
> after some time, report the authentication with "00:00:00:00:00:00"
> timed out.
> 
> Any ideas would be appreciated.
> 
> thanks
> 
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
>



More information about the HostAP mailing list