D-Link 650 firmwire request

Adam PAPAI wooh at freemail.hu
Fri Dec 17 20:39:48 EST 2004


I ve downloaded the firmware, but it still doesn't want to work.

CardCtl says about my card:

bash-2.05b# cardctl info
PRODID_1="WLAN"
PRODID_2="11Mbps_PC-Card_3.0"
PRODID_3="ISL37101P-10"
PRODID_4=""
MANFID=000b,7110
FUNCID=6

Probably I have bad firmwires. Could anybody send me 2 working firmwire?
Thanks in advance..

I load the firmwires ( I guess someone of the firmwires are bad )

#bash-2.05b# /usr/local/bin/prism2_srec -vr wlan0 PM010102.hex
Special S3 firmware info record - name 'PM010102.HEX'
Start address 0x003f0000
S3 CRC-16 generation record: start=0x007E17FE len=2 prog=0
srec summary for PM010102.hex
Included file name: PM010102.HEX
Component: 0x0015 1.1.2 (primary firmware)
Supported platforms:
   0x800e 1.0.0,  0x8015 1.0.0,  0x8019 1.0.0,  0x801d 1.0.0,  0x8024 1.0.0
Interface compatibility information:
   role=Supplier variant=2 range=4-4 iface=Primary Firmware-Driver (3)
   role=Actor    variant=2 range=1-1 iface=Controller-Firmware (2)
Separate S3 data areas:
S3 area count: 3
   addr=0x007E0000..0x007E092F (len=2352)
   addr=0x007E0A00..0x007E13D7 (len=2520)
   addr=0x007E17FE..0x007E17FF (len=2)
Total data length: 4874
Start address 0x003f0000

ioctl[PRISM2_IOCTL_HOSTAPD]: Inappropriate ioctl for device
Missing wlan component info
Could not read wlan RIDs
#

  and try to set mode Managed and dhclient wlan0.. after it I get these 
messages on dmesg.

hostap_crypt: registered algorithm 'NULL'
hostap_cs: 0.3.0 - 2004-12-05 (Jouni Malinen <jkmaline at cc.hut.fi>)
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
hostap_cs: setting Vcc=33 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0047, io.base=0x0000, len=128
hostap_cs: Registered netdevice wifi0
hostap_cs: index 0x01: Vcc 3.3, irq 5, io 0x0200-0x027f
wifi0: __hfa384x_cmd_no_wait(6) - timeout - reg=0xd90f
hostap_cs: first command failed - assuming card does not have primary 
firmware
hostap_cs: assuming no Primary image in flash - card initialization not 
completed
wifi0: test Genesis mode with HCR 0x1f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 41
Readback test failed, HCR 0x1f write 00 e1 a1 ff read 00 ce a1 ce
wifi0: test Genesis mode with HCR 0x0f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 41
Readback test succeeded, HCR 0x0f
prism2_pccard_genesis_sreset: original COR 41
wifi0: registered netdevice wlan0
wlan0: could not set interface UP - no PRI f/w
wlan0: could not set interface UP - no PRI f/w
wifi0: cannot get RID fd0b (len=1008) - no PRI f/w
wifi0: cannot get RID fd0b (len=1008) - no PRI f/w
wifi0: cannot get RID fd0b (len=1008) - no PRI f/w
wifi0: cannot get RID fd0b (len=1008) - no PRI f/w
prism2_download: dl_cmd=4 start_addr=0x003f0000 num_areas=3
wifi0: test Genesis mode with HCR 0x0f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 41
Readback test succeeded, HCR 0x0f
prism2_pccard_genesis_sreset: original COR 41prism2_hw_init: initialized 
in 0 ms
wifi0: NIC: id=0x801d v1.0.0
wifi0: PRI: id=0x15 v1.1.2
Could not get RID for component STA
wifi0: Failed to read STA f/w version - only Primary f/w present
prism2_download: dl_cmd=5 start_addr=0x003f0c01 num_areas=3
prism2_hw_init: initialized in 26 ms
wifi0: NIC: id=0x801d v1.0.0
wifi0: PRI: id=0x15 v1.1.2
wifi0: STA: id=0x1f v1.8.3
prism2: wlan0: operating mode changed 3 -> 2
wifi0: LinkStatus=2 (Disconnected)wifi0: LinkStatus: BSSID=00:02:6f:06:24:6f
wifi0: LinkStatus=6 (Association failed)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wifi0: LinkStatus=6 (Association failed)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wifi0: LinkStatus=6 (Association failed)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c
    retry_count=0 tx_rate=0 fc=0x0108 (Data::0 ToDS)
    A1=44:44:44:44:44:44 A2=00:02:6f:06:24:6f A3=ff:ff:ff:ff:ff:ff 
A4=00:00:00:00:00:00
wifi0: LinkStatus=6 (Association failed)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wifi0: LinkStatus=6 (Association failed)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wifi0: LinkStatus=6 (Association failed)






:



More information about the HostAP mailing list