Corrupted Prism2 Card

Brian Sturgill zen_hacker at hotmail.com
Thu Dec 16 22:00:20 EST 2004


Try using Genesis mode : Bring it up with ram based firmware and then 
reflash with flash firmware.  Here is a clip from the mini-howto....

Apparently prism2_srec can do more than that. It can be used to RAM-based 
downloading. Jouni also mentioned one way to download primary firmware alone 
in Genesis mode.

Date: Sat, 2 Aug 2003 23:01:26 -0700
From: Jouni Malinen
....
And the new magic prism2_srec commands:

# Download primary firmware into RAM using Genesis mode
./prism2_srec -g wlan0 ak010100.hex
# card is now in PRI-only mode with very limited functionality

# download station firmware into RAM
./prism2_srec -r wlan0 rf010409.hex
# card is now in normal mode



>From: Lawrence Wong <lawrencewong72 at yahoo.com>
>To: hostap at shmoo.com
>Subject: Re: Corrupted Prism2 Card
>Date: Thu, 16 Dec 2004 18:08:06 -0800 (PST)
>
>--- jar <jar at pcuf.fi> wrote:
>
> > jar wrote:
> >
> > > You shoud use e.g. the following firmware images:
> > >
> > > ./prism2_srec -f wlan0 pk010101.hex sf010704.hex
> > >
> > Sorry, I mean the command:
> >
> > ./prism2_srec -f wlan0 pk010101.hex sf010800.hex
>
>Thanks for the suggestion. I tried but it gave the
>following error.
>
>
># ./prism2_srec -f wlan0 pk010101.hex sf010800.hex
>srec summary for pk010101.hex
>Component: 0x0015 1.1.1 (primary firmware)
>
>srec summary for sf010800.hex
>Component: 0x001f 1.8.0 (station firmware)
>
>ioctl[PRISM2_IOCTL_HOSTAPD]: No such device
>Missing wlan component info
>Could not read wlan RIDs
>
>
>Seems like wlan0 is not accessible by the utility.
>
>
>
>
>__________________________________
>Do you Yahoo!?
>Read only the mail you want - Yahoo! Mail SpamGuard.
>http://promotions.yahoo.com/new_mail
>_______________________________________________
>HostAP mailing list
>HostAP at shmoo.com
>http://lists.shmoo.com/mailman/listinfo/hostap





More information about the HostAP mailing list