segmentation fault on CVS version for private_key_password..
Leonardo Maccari
maccari-thisaintpartofmyaddress- at lenst.det.unifi.it
Mon Dec 13 06:26:57 EST 2004
first of all a doubt, I've just checked out from CVS, and this is the
changelog:
2004-12-05 - v0.3.0 (beginning of 0.3.x development releases)
* fixed card enabling after firmware download in case any of the
netdevs were up when the download was started
[...]
but if I look at the web interface:
2004-12-12 - v0.3.1
* added support for integrated EAP-TLS authentication (new hostapd.conf
variables: ca_cert, server_cert, private_key, private_key_passwd);
this enabled dynamic keying (WPA2/WPA/IEEE 802.1X/WEP) without
[...]
am I missing something?
then the supposed bug:
that's my wpa_supplicant.conf file:
network={
ssid="gamma"
# scan_ssid=1
# proto=RSN
key_mgmt=WPA-EAP
pairwise=CCMP TKIP
group=CCMP TKIP
eap=TLS
identity="alpha at lab"
ca_cert="/root/lab/configs/certs/NewCAcert.crt"
client_cert="/root/lab/configs/certs/New-client-alpha.crt"
private_key="/root/lab/configs/keys/New-alpha-key-pub-priv.pem"
# private_key_passwd=""
# priority=1
}
if I uncomment the private_key_password string it works, even if the key
has no password, otherwiswe:
[root at alpha wpa_supplicant]# ./wpa_supplicant -di wlan0 -c /etc/hostapd/wpa_supplicant.conf
Initializing interface 'wlan0' conf '/etc/hostapd/wpa_supplicant.conf'
driver 'default'
Configuration file '/etc/hostapd/wpa_supplicant.conf' ->
'/etc/hostapd/wpa_supplicant.conf'
Reading configuration file '/etc/hostapd/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0
eapol_version=1
ap_scan=1
Priority group 0
id=0 ssid='gamma'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Own MAC address: 00:0e:6a:7a:e1:0d
wpa_driver_hostap_set_wpa: enabled=1
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_countermeasures: enabled=0
wpa_driver_hostap_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Disconnect event - remove keys
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
RTM_NEWLINK, IFLA_IFNAME: Interface 'wifi0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Disconnect event - remove keys
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b19 len=12
Received 405 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:04:75:62:7b:4b ssid='PIN-LTT' wpa_ie_len=0 rsn_ie_len=0
skip - no WPA/RSN IE
1: 00:0e:6a:7a:eb:f9 ssid='gamma' wpa_ie_len=32 rsn_ie_len=0
selected
Trying to associate with 00:0e:6a:7a:eb:f9 (SSID='gamma' freq=2422 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT 802.1X
WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01
00 00 50 f2 04 01 00 00 50 f2 01
No keys have been configured - skip key clearing
wpa_driver_hostap_set_drop_unencrypted: enabled=1
wpa_driver_hostap_associate
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Disconnect event - remove keys
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
Wireless event: cmd=0x8b04 len=12
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Disconnect event - remove keys
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
Wireless event: cmd=0x8b1a len=18
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:0e:6a:7a:eb:f9
Association event - clear replay counter
Associated to a new BSS: BSSID=00:0e:6a:7a:eb:f9
No keys have been configured - skip key clearing
Associated with 00:0e:6a:7a:eb:f9
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Wireless event: cmd=0x8c00 len=20
RTM_NEWLINK, IFLA_IFNAME: Interface 'wifi0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Authentication with 00:0e:6a:7a:eb:f9 timed out.
wpa_driver_hostap_disassociate
wpa_driver_hostap_reset: type=2
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Disconnect event - remove keys
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
RTM_NEWLINK, IFLA_IFNAME: Interface 'wifi0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b19 len=12
Received 314 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:0e:6a:7a:eb:f9 ssid='gamma' wpa_ie_len=32 rsn_ie_len=0
selected
Trying to associate with 00:0e:6a:7a:eb:f9 (SSID='gamma' freq=2422 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT 802.1X
WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01
00 00 50 f2 04 01 00 00 50 f2 01
No keys have been configured - skip key clearing
wpa_driver_hostap_set_drop_unencrypted: enabled=1
wpa_driver_hostap_associate
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Disconnect event - remove keys
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
Wireless event: cmd=0x8b04 len=12
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Disconnect event - remove keys
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
Wireless event: cmd=0x8b1a len=18
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:0e:6a:7a:eb:f9
Association event - clear replay counter
Associated to a new BSS: BSSID=00:0e:6a:7a:eb:f9
No keys have been configured - skip key clearing
Associated with 00:0e:6a:7a:eb:f9
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
RX EAPOL from 00:0e:6a:7a:eb:f9
Setting authentication timeout: 70 sec 0 usec
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request method=1 id=0
EAP: EAP entering state IDENTITY
EAP: EAP-Request Identity data - hexdump_ascii(len=5):
68 65 6c 6c 6f hello
EAP: using real identity - hexdump_ascii(len=9):
61 6c 70 68 61 40 6c 61 62 alpha at lab
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
EAPOL: SUPP_BE entering state RECEIVE
WPA: EAPOL frame too short, len 14, expecting at least 99
RX EAPOL from 00:0e:6a:7a:eb:f9
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request method=13 id=1
EAP: EAP entering state GET_METHOD
EAP: initialize selected EAP method (13, TLS)
TLS: Trusted root certificate(s) loaded
Segmentation fault
I guess the problem is function SM_STATE(EAP, GET_METHOD) in
eap.c, :
sm->eap_method_priv = sm->m->init(sm);
that doesn't return.
ciao,
leonardo.
--
Key fingerprint = 3129 C583 F03B 2E73 0115 C040 3489 0185 B592 19FE
Obviously -thisaintpartofmyaddress- is not part of my real email address
>> PRIVACY DISCLAIMER
This e-mail and any attached files, sent by LENST e-mail system,
contains confidential and/or privileged information and is
intended only for the person or entity explicitely addressed and
only for the purposes therein set forth.
If you are not the intended recipient please notify the LENST
administrators immediately at postmaster at lenst.det.unifi.it.
More information about the HostAP
mailing list