togg at togg.de
Sat Aug 28 04:13:50 EDT 2004
Just flash with "prism2_srec -v -f wlan0 pk010101.hex sf010704.hex" or
volatile with "prism2_srec -v -r wlan0 ak010101.hex rf010704.hex" (firmware
will be old again after reboot)
pkXXXXXX is primary non-volatile flash and sfXXXXXX is secondary
non-volatile flash. I think secondary flash version 010704 is most stable,
at least for my prism 2.5 mini-pci cards.
For non-volatile flashing you have to enable it in hostap-config.h in the
driver directory before compiling.
Von: hostap-bounces+togg=togg.de at shmoo.com
[mailto:hostap-bounces+togg=togg.de at shmoo.com] Im Auftrag von Steffen
Gesendet: Samstag, 28. August 2004 06:25
An: hostap at shmoo.com
Betreff: Re: flashing-problem
On Wednesday 25 August 2004 14:47, Jouni Malinen wrote:
> On Wed, Aug 25, 2004 at 01:40:18AM +0000, Steffen Schwientek wrote:
> > I have flashed my card with the prism2_srec programm. Unfortunately
> > something has gone wrong.
> > My command was
> > ./prism2_srec wlan0 -f pk010101.hex
> You seemed to have only updated primary firmware, which will disable the
> secondary firmware.
> > Here is the output of
> > bash-2.05b# ./hostap_diag wifi0
> > Host AP driver diagnostics information for 'wifi0'
> > NICID: id=0x801b v1.0.0 (PRISM III PCMCIA (SST parallel flash))
> > PRIID: id=0x0015 v1.1.1
> > ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
> You will need to upgrade station firmware to get the card in fully
> operational state.
Unfortunately that´s not possible for me. If I trie it on the wlan
it tellsbash-2.05b# ./prism2_srec -g wlan0
srec summary for rf010800.hex
Included file name: RF010800.hex
Component: 0x001f 1.8.0 (station firmware)
ioctl[PRISM2_IOCTL_HOSTAPD]: No such device
Missing wlan component info
Could not read wlan RIDs
HostAP mailing list
HostAP at shmoo.com
More information about the HostAP