Hostapd Preauthentication Segfault

Simi Winiker simi at winiker.ch
Tue Aug 10 08:18:53 EDT 2004


Hi Gunter,
this was not the posting you wanted to answer to.
Has someone successfully tested RSN PRE-authentication ? Jouni?
                                    ^^^
The part transferring the new key to the PMKSA cache works on the
wpa_supplicant and hostapd, but then how can I trigger the roaming to
the new hostapd ?

Changing "iwpriv wlan0 host_roaming" to 0,1 or 2 does not seem to change
anything. Running "iwconfig wlan0 ap <new ap>" does not trigger the
802.1x authentication on the new hostapd. So how is it done? I could not
find it in the readme.

Please help :-)

Simi

>> I have tested EAP-TLS and EAP-PEAP on Cisco ACS version Release3.2
>> (3) Build 11.  It seems to work good.  I would like to have the
>> clients re-authenticate every 2 hours.  Currently, it seems to be
>> re-authenticating every 30 or so minutes.  Is there a setting in the
>> config file that I can adjust this setting?
>
> You cant define reauthentication-time on wpa-supplicant side.
> Reauthentication is initiated from accesspoint. If you'r using hostapd
> for your accesspoint you can configure reauthentication time in config
> file:
>
> # EAP reauthentication period in seconds (default: 3600 seconds; 0
> =disable # reauthentication).
> eap_reauth_period=7200
>
> regards
> gunter






More information about the HostAP mailing list