router with 5 cards or more

[Christian Zoffoli]

Jim TerWee wrote:
> I have three locations running 4 cards on a Intel Motherboard with a
> Celeron processor. The hardware is linksys plx cards with senao pcmcia
> cards with firmware ranging from 1.3.6 to 1.5.6. I had no problems in
> setting these up. Two of these are running the wisp-dist and the other is
> just RedHat 8.
> 

I've found that the problem is the kernel 2.5.65 . Nevetheless, without 
it I can't enable APIC mode and I've to share too many interrupts.

Have you tried many dual slot adapters on a single mainboard?

Regards,
Christian